One of the first things I would do is get a degreaser and carefully spray it on the larger non electrical items and wipe it off with a wet rag, then dry. Not sure how far you wanna go but a wire tuck will eliminate alot of tangled lines. Before I went boost, I removed the heat shield covering the downpipe and wrapped them in heat wrap. Throw on a cool air intake to remove the oem and for the rest of our silicone hoses you can use a product called back to Black. You could also replace your radiator hoses and plug wires if you havea color scheme in mind. Good luck and reach out if you hhave any questions.
