Bumper busted.

[Momentum]

PLEASE if you really think you cannot do this, just don't order it...and let it be as it is.

To put it on you can literally do it just by jacking up that corner and clipping the fender liner on either with actual push tabs or zipties.

I can't see a shop charging more then like half hour for it, but chances are you'll get dinged for a full hour of labor.

Yeah, I understand. Thanks for the help.

 

[LowerMyCG5]

Mine have been off for about a year. Ive ony had 2 problems
1 . Ebay "water proof" hid balasts . One of the connectors rusted out
2 . I have no intake resonator so half my filter used to get wet. Not any more since i added piping at the bottom.

One flew off on the interstate and i took the other off because im LOW

 

[SykVSyx]

OP, you MAY want to take the wheel off so you can get right in there.

They sell the tabs on ebay as well, your local stealership will likely overcharge for less than you can get on ebay.

 

[Momentum]

OP, you MAY want to take the wheel off so you can get right in there.

They sell the tabs on ebay as well, your local stealership will likely overcharge for less than you can get on ebay.

How do you figure out what tabs to get? I mean i know i can just compare to the other ones but is there an actual name lol or whatever.

 

[SykVSyx]

These should work,

Fender Liner Clips

 

[001Stunna]

How do you figure out what tabs to get? I mean i know i can just compare to the other ones but is there an actual name lol or whatever.

For fender holes around the wheel area (C)
http://www.ebay.com/itm/30PCS-ACCOR...ies&hash=item4ab44afa87&vxp=mtr#ht_674wt_1037

For the holes where it joins to the bumper under liner (D)
http://www.ebay.com/itm/30PCS-Bumpe...ries&hash=item4ab3fe47a9&vxp=mtr#ht_925wt_905

^both links above are cheapest i could find considering shipping to texas(taken from your user cp)

 

[Momentum]

These should work,

Fender Liner Clips

For fender holes around the wheel area (C)
http://www.ebay.com/itm/30PCS-ACCOR...ies&hash=item4ab44afa87&vxp=mtr#ht_674wt_1037

For the holes where it joins to the bumper under liner (D)
http://www.ebay.com/itm/30PCS-Bumpe...ries&hash=item4ab3fe47a9&vxp=mtr#ht_925wt_905

^both links above are cheapest i could find considering shipping to texas(taken from your user cp)

Sweet, Thanks for everything. You basically just pop them in right?

 

[sabSquishy]

Just keep it off like a boss.

 

[accord_luv]

its good to have it on if youre running a cold air intake considering the fact that the filter litterally sits right in front of that right tire. you wouldnt want your car to take in any water.

other than that.. you dont really need it. i tried to keep mines on but since im so low my tires slowly ate away at it so i just took it off.

 

[001Stunna]

Sweet, Thanks for everything. You basically just pop them in right?

Yes, they're simple push tabs...the fender ones however can be popped in but have to be turned/screwed out if need be.