Accord coupe CG2 dash swap.

[Valet]

Now that's something new!

How will you get by with no cup holders though?

 

[2002CG3coupe]

Now that's something new!

How will you get by with no cup holders though?

This

Also do you have pics of how the CL m/t dash/armrest too??? This is an interesting, I would like to try this, but with bb6 cluster, if possible. Then again that looks like a lot of work I don't want to do lol.

 

[Brad2274]

i
need
this.
cant believe it fits that well, here goes the search for a cheap dash

 

[DH48]

Lol I am making a cup holder too cleansleeper . Just did not have a pic. The armrest is bigger then the accord one but it fits just nicely. Ill try to get some pics next week as at the moment the accord is not may daily drive. The engine is coming out soon so it is in a garage so i can work on it on weekends or when i have time after work.

Well compared to the civic dash swap i did this was more like a walk in the park. It was a surprise to me to how well it fitted. The door panel and dash gap could be a bit better but all in all it was a damn easy swap + gives a nicer look to the whole car.

 

[twofast4u]

Wow! This has to be one of those rare mods. Great job overall.

 

[Elite1JDM]

nice!! looks really clean bro! Your my idol, LOL

 

[Brad2274]

i gave you rep for this, you deserve it for figuring this out AND making a DIY

 

[OldNo7_CG2]

I'm tempted to do this if I can get it for cheap but I need to get my car running true manual v6 first smh

 

[puzzlemaster94]

Thought i would share this with you all.
I dont know about you guys but the accord dash looks like its out of a 97 civic No offense

So what would look better. Well as i had a friend doing a 03 CL-s J32 swap on his car I got hooked on the CL-s dash. The CL-s itself look butt ugly...again no offense lol.

But the CL-s dash.....maaaaan one sexy dash

The swap:
First off all what will you need ? Well as much as you can get from the CL-s and i do mean all. as its all a direct plug and play......yes plug and play.

So the list.
1)Dash and all trim
2)Dash wiring ( makes it easy to swap)
3)The subframe
4)Airbag
5)Armrest
6) (recommend) The blower parts (if you get the AC with NAVI screen you need the navi box from the trunk)
7) Blower mode motor (if you get the Navi as it has more functions then the accord one and it will just show "Short Circuit" error code but will function)


So the old dash removal is easy. Remove the battery + wire as you will be removing the airbag from the steering wheel and the passanger side.

so this is what it looks like without the dash

Now the subframe is exposed. This will also need to be removed as it will not work with the CL-s dash....why ?...well the airbag mount is different and the side mounts for the dash do not align.

The right is accord and left is CL just one bold hole is out of place so if you really need to use the accord subframe the you need to re-weld it.
The subframe of the cl is a direct fit into the accord. No moding needed.

Now the part why it is best to get all out of the CL. The center blower box is not a direct fit to the dash. The part that blows air to the center vents is wider.
Here is a pic of the parts

Think the right one was the CL and left accord....lol am starting to forget but you get the idea.....it will have to be moded or just swap all the parts for the CL. The blower looked almost identical but i did not get it so that is why i had to mode it.

So the fitting

It is best if you get the plastic side covers to or you could just cut a bit of the accord ones as one part will get in the way. Show in the pic

So the arm-rest? well it depends on that you have and what you want. If you want to keep the hand brake you will need to find a manual CL-s armrest ...the automatic has no handbrake just the E-brake under the dash as most US cars. i had to mod the center panel as i need the handbrake and i will be going manual soon but that is for another thread

The CL-s AT armrest can be used but will need cutting and reworking.

You can see the CL-s has the cup holders in there

If you do not mind losing the cup holder then can use just about anything to make the hand brake cover look nice. I used plastic but you can use fiberglass as it is better to work.

About the door panels. Well they do not fit the CG2. The door is a different shape then the CG2 is. I will have pictures of the dif. soon.

Will have to take a better picture of the final swap but here is a crappy one

When you are swapping the dash i would recommend doing a LED conversion on the cluster as well.

+1. I have always wanted to do that, thank you so much

 

[puzzlemaster94]

Also, could you swap out just the gauges without swapping the rest of the dash?