Wheel Fitment Thread

[scrapnav6]

^Theres never really a need for a 35 sidewall. Espically on stock suspension.

 

[99accord boi]

kevin can i be as cool as you?
my front fender cracked too

 

[DrOwZee]

dammit, i guess i'm going lower lol

 

[Sleeper Cell]

kevin can i be as cool as you?
my front fender cracked too

 

[Shadow1]

Wheres the f***in like button...

 

[RedRyder]

^check your local craigslist posts. Theres usually a few for rent or someone that will do it for you on there. Ive never done it personally.

Thanks, yeah I don't think I'm cut out for it lol.

My friend rolls/pulls fenders with a wooden broom handle and a heat gun, they come out flawless too. All you have to do is make sure you use the heat gun and take your time.

Hmm I think I'd rather use a tool that was designed for doing it at least for my first time, but props to your buddy for making it work.

Chris, I will emphasize this heavily. Make sure that there are NO pebbles, rocks, or debris on or behind the fender lip BEFORE you start rolling them. Otherwise you'll get ripples that will be in there forever. Clean that area thoroughly!

Thanks Kevin! Good to know.

 

[truWarier02]

 

[98V6Accord]

Need to drop! Recommendations? Have heard that drops can tuck the rim in.
Any spring/shock combos u can recommend?

Zenetti
18 x 8.5 + 40 (Hub rings needed)

225 40 r18

 

[White6GAV6]

There are plenty of options out there with a wide range of different ride heights available. Check out the Suspension Review Thread here: http://www.6thgenaccord.com/forums/showthread.php?t=16578

With any drop you will more than likely need to roll your rear fenders and do the bumper tab relocation.

 

[98V6Accord]

will check it out, thanks