you don't need those headers. reuse the engine bracket from your j30a1. I used regular innovative 65a engine mounts, j30a1 engine bracket, and obx j30 headers. they clear fine. btw i would invest in an ingalls stiffy torque dampener if you like your axles.
3.7 inlet is 80mm. thats why i picked a 76mm tb. honestly, its overkill but w.e you can only flow so much with those heads. I'm building another j series over the summer, j35a3 sitting in the back of my garage. I'm in the middle of a s15 sr20det engine build and a couple of 4g63s. Just got my...
heres what you need.
Manifold part# 17160-RK2-A00 from Acura
Manifold cover part # 17116-R70-A00 from Honda
P2R adapter part# P383B= (Black), P383R= (Red), P383= (Silver)
P2R gasket part# P141
P2R gasket part# P149
That is all the part #'s for the parts that you will need to make the 09 TL awd...
lol at spacing the subframe. 09 tl shawd intake mani and your goodie. make sure you get the right bolts because the lengths are different and id recommend the p2r gaskets for the intake mani and tb. remember you ned the adapter for the dbc tb (Also get that from p2r) also if i was you id switch...
Re: *Update 10/10/12* Halabeaster54's J36/6 Speed
the accord has been off the road since april? don't remember. i transferred my plates to the subaru. both cars are/were registered in new york.
Halabeasters.......Beast
ok well im going to try this again.
The car just has
a bunch of ebay bolt ons
stock fuel system with a walbro 255 on regular pump gas
ebay mufflers with the most half assed custom exhaust ever (getting cut off)
some carbon by fiber bits
a fancy computer with an aem...
Re: My turbo build g23 or f23 head
not true at all. we have a 10s evo running on a godspeed 35r for the last year and half with 0 problems. almost all of the evos we work on have ebay manifolds and theyre great.
ohhhh yea it could definitely be a bearing. your lucky you don't own a subaru. i believe on most honda 4cyl people just drop the pan and change a bearing, well at least thats what chris miller does.
well i can't speak for the 4 cyl accords but i can speak for evos (literally an awd honda). usually when they make over 550tq the design of the pan makes all the oil go away from the feed when they floor it because of the inertia. thats why busher, ams, ams, ect, make aftermarket pans. just...
not worth porting the stock manifold on the j30a1. your much better off getting an 01-02 acura mdx intake manifold (because its the same thing as the j32a2 type s manifold but has larger velocity stacks beneath the plenums) or better yet a 2011 tl sh awd intake manifold like me. you'll need some...