Besides my battery relocation cage that i made (check out the DIY section for that), i also revamped the whole suspension on the accord. This included:
Eibach front sway bar
Progress TL rear sway bar
Moog endlinks all around
AMR Engineering Coilovers 10K/8K
Here are some pics from the installs.
Whats left of the stock endlinks...may you rest in peace:
Old front bar compared to the new front bar:
Front bar installed:
Rear bar installed:
Moog endlinks with stock strut and spring assembly:
AMR Coilovers:
AMR front coilover installed:
End result drop:
Some pics of the car:
All in all the suspension is finally up to my standard. The car handles absolutely amazing. Can take corners super hard and fast without tire squeal and loss of control. One of the best suspension setups i've ever riden driven/been in of any car, no lie. Could have gotten stiffer springs but for the roads here in CT and NY it would have been a bad idea. Same with the drop, could have been lower, but bottoming out would have been an issue. Super happy with the mods. The only annoying parts of the install were the progess bar not being able to clear the exhaust hanger, even after cutting it to the point were it was the width of the rubber doughnut(had to cut the whole hanger off). And the AMR rear coilovers being super girthy and making contact with the rear endlinks. That one was solved by placing washers between the hub bracket and the endlink, to push it back and clear the lower part of the coilover. Besides those two things, solid suspension setup.
Eibach front sway bar
Progress TL rear sway bar
Moog endlinks all around
AMR Engineering Coilovers 10K/8K
Here are some pics from the installs.
Whats left of the stock endlinks...may you rest in peace:
Old front bar compared to the new front bar:
Front bar installed:
Rear bar installed:
Moog endlinks with stock strut and spring assembly:
AMR Coilovers:
AMR front coilover installed:
End result drop:
Some pics of the car:
All in all the suspension is finally up to my standard. The car handles absolutely amazing. Can take corners super hard and fast without tire squeal and loss of control. One of the best suspension setups i've ever riden driven/been in of any car, no lie. Could have gotten stiffer springs but for the roads here in CT and NY it would have been a bad idea. Same with the drop, could have been lower, but bottoming out would have been an issue. Super happy with the mods. The only annoying parts of the install were the progess bar not being able to clear the exhaust hanger, even after cutting it to the point were it was the width of the rubber doughnut(had to cut the whole hanger off). And the AMR rear coilovers being super girthy and making contact with the rear endlinks. That one was solved by placing washers between the hub bracket and the endlink, to push it back and clear the lower part of the coilover. Besides those two things, solid suspension setup.