Camber kit Question

Adancito

Well-Known Member
Joined
Oct 18, 2010
Posts
261
Reaction score
0
Location
Bellflower
Is it better to get the control arm camber kit or just the ball joint? Searched around but no luck. Thnx
 

001Stunna

Well-Known Member
Joined
Oct 21, 2008
Posts
3,203
Reaction score
81
Location
Toronto, ON CANADA
Regarding the front camber kit
Both will do the same thing.
Both will possibly hit and cause a noise if you're using them while being too low.

The arm one might be easier to install if you're doing it yourself.
The balljoint one will require you to hammer out or press out the old balljoint and insert the new one. Sometimes when doing this yourself you might make the hole larger and possibly sacrifice the integrity of the balljoint to control arm linkage.

A camber kit on the front is really not usually needed.


If you are reffering to the rear camber kit. Both do the same thing and are pretty similar, just different mounting locations and arms they replace. just go with your preference after you have researched both.
 
Last edited:

Adancito

Well-Known Member
Joined
Oct 18, 2010
Posts
261
Reaction score
0
Location
Bellflower
I see..so they both do the same thing. found some on ebay..their $269 per side? control arms?
 
Back
Top