Tint Removal Issues

NorcalLX

Member
Joined
Apr 12, 2018
Posts
16
Reaction score
0
Location
Northern Kalifornistan
Attempted to remove the bubbled, looking like crap tint off my rear glass and am having issues. Used a garment steamer on the upper portion in combination with a heat gun on the lower section and it appears only one layer came off as there is an opaque layer with bubbles remaining that neither steam nor the heat gun seem to have any effect on. Also, I noticed some short sections of my defroster lines appear to have come off with the first layer.

F.M.L. :banghead:
 

jypatric

Well-Known Member
Joined
Feb 8, 2015
Posts
81
Reaction score
3
Location
Ga
You can use 0000 wire wool with water and detergent mixture.
 
Back
Top