Go Back   6th Gen Accord DIY and Performance Forums

Register to remove these ads


View Single Post
  #15121  
Old 06-26-2017, 01:19 AM
Nam1911a1's Avatar
Nam1911a1 Nam1911a1 is offline
Senior Member
Points: 4,028, Level: 18 Points: 4,028, Level: 18 Points: 4,028, Level: 18
Activity: 12% Activity: 12% Activity: 12%
 
Join Date: Aug 2016
Location: Southern Indiana
Age: 30
Posts: 405
Rep Power: 10
Nam1911a1 is an unknown quantity at this point
Re: What'd you do to your accord today?

My starter solenoid wasn't getting a 12 volt signal from the ignition. The damn terrible thing went out again after a year. The ignition relay in the fuse/relay box was clicking. But I had no voltage from the block to the solenoid.

So I said *** it I'll bypass it all together. Went to advanced auto parts and got a 20 amp onff switch and a push button starter switch.

Got power from the main alternator fuse to the on/off switch then series it to the push button start. Off the other side of the push button start I routed it to the starter solenoid contact.

Put the key in and turn forward. Flip the switch on. Press the push button start. BAM the engine roars to life. Then flip the switch off to cut power to the push button start. Took a couple hours and a few beers. I was not rushing things. Routing my wires cleanly and zip tying everything nice and neat.
__________________
6th Gen Noob - Major tinkerer
Reply With Quote
 
» Featured Ride
CHECK OUT THIS WEEK'S FEATURED RIDE!



Powered by vBadvanced CMPS v3.2.3