Torq Specs

Honda4Life

Well-Known Member
Joined
Jul 28, 2011
Posts
299
Reaction score
1
Location
Central Coast, California
So I want to create a sticky where we can have a reference for all the major nuts torq specs. I do not know them but please let me know what they are so I can update the page.

Lug Nuts -

Transmission Drain Plug -

Oil Drain Plug -

Spark Plugs -

Calipers bolts -

Rotor Bolt -

Valve Cover Bolts -




And feel free to add additional bolts...
 

crossfire

Well-Known Member
Joined
Oct 17, 2010
Posts
250
Reaction score
2
Location
Washington
Off the top of my head

Lug Nuts-80lbs/ft definitely right at least for a V6

Oil Drain Plug-24lbs/ft

Caliper Bolts-27lbs/ft
 

001Stunna

Well-Known Member
Joined
Oct 21, 2008
Posts
3,203
Reaction score
81
Location
Toronto, ON CANADA
Torque Specs (ft/lbs)
Auto Drain Plug: 36
Manual Drain Plug: 29
SparkPlug: 156 in/lbs
Wheel Lug Nuts: 80
Water Pump Retaining Bolts: 104 in/lbs
Thermostat housing cover bolts: 104in/lbs
Throttle Body Mounting Nuts: 16
Fuel Pressure Regulator:
...i4: 108in/lbs
...v6: 22
Fuel Pulsation Damper: 16
Engine Stiffener Bolt:
...i4: 10mm bolt: 33
...i4: 12mm bolt: 47
...v6: 28
Transaxle to engine bolts: 47
Subframe Mounting Bolts:
...10mm: 47
...12mm: 75
Clutch Master Cylinder mounting nuts: 110in/lbs
Clutch release cylinder mounting bolts: 17
Clutch pressure plate bolts: 19
Drive-axle/Hub Nut: 181
Intermediate shaft bearing support bolts: 29
Brake Hose to caliper banjo bolt: 25
Master Cylinder Mounting Nuts: 132in/lbs
Strut brace mounting nut: 16
Brake booster mounting nuts: 110in/lbs
Wheel sensor mounting bolts: 88in/lbs
Wheel speed sensor bracket nut: 84in/lbs
Front Caliper Mounting Bolts:
...i4: 54
...v6: 36
Front Caliper Mounting Bracket Bolt: 80
Rear Caliper Mounting Bolts:19
Rear Caliper Mounting Bracket Bolt: 28
Disc to hub screws: 84in/lb
Rear wheel cylinder nuts: 80in/lbs
Front Damper Fork Pinch Bolt: 32
Front Damper fork to lower control arm through bolt/nut: 47
Front Lower control arm inner pivot bolt: 47
Front Radius rod to lower control arm bolts 119
Front Radius Rod to crossmember nut: 32
Front Damper to Chassis Body Bolts/Nuts:
...8mm: 144in/lbs
...10mm: 37
Front Damper Shaft Nut: 22
Front Stabilizer Bar Link Nut: 29
Front Stabilizer Bar Bracket Bolts: 22
Front Lower BallJoint Nut: 36-43
Front Upper Balljoint Nut: 29-35
Front Upper Control Arm Pivot Bolts: 47
Rear lower arm inner pivot bolt: 43
Rear Lower arm to knuckle bolt/nut:43
Rear Control arm inner pivot bolt/nut:40
Rear Control arm to knuckle nut:43
Rear Trailing arm to chassis bolt:43
Rear Trailing arm to knuckle bolt:43
Rear Leading arm inner pivot bolt:43
Rear Leading arm to knuckle bolt:43
Rear Upper arm inner pivot bolt:43
Rear Upper arm to knuckle castle nut:36-43
Rear Hub Nut: 139
Rear Damper Shaft Nut: 22
Rear Stabilizer bar link nut: 29
Rear Stabilizer bar bracket bolts: 22
Rear Shock absorber to knuckle bolt: 43
Rear Shock absorber upper mounting bolts: 37
Front Steering Intermediate shaft pinch bolt: 16
Power Steering Pump Mounting Bolt: 16
Power Steering Line bolts: 96 in/lbs
Steering Wheel Nut: 29
TieRod End to steering knuckle nut: 32

For I4 Engines
Fuel Rail Mounting Bolts: 102in/lbs
Air Intake Plenum Bolts: 16
Valve Cover Bolts: 86 in/lbs
Balance Shaft/Timing Belt Tensioner Nut: 33
Camshaft sprocket bolt: 43
Crankshaft pulley bolt: 181
Flywheel to crankshaft bolt: 76
Drive-plate to crankshaft bolt: 54
Intake Manifold nuts: 16
Exhaust Manifold nuts: 23
Balance Shaft Front/Rear Sprocket Bolt: 22/18
Oil pan to engine bolts: 120 in/lbs
Oil pump housing bolts: 104in/lbs
Rear Main Seal housing bolts: 104in/lbs
Timing Belt Cover Bolts: 104in/lbs
Front Engine Mount:
...Bracket to chassis bolt: 28
...Bracket to engine bolts: 28
...Through Bolt: 47
Rear Engine Mount:
...Mount to chassis bolts: 28
...Bracket to engine bolts: 40
...Nut for mount stud: 40
Left Engine Mount
...Bracket to engine bolt/nuts: 40
...Mount to chassis bolts: 28
Right engine mount
...Through bolt: 40
...Bracket to tranaxle nut: 28
...Mount to chassis bolts: 28

FOR V6 ENGINES
Camshaft thrust plate bolt: 16
Camshaft sprocket bolts: 67
Crankshaft pulley bolt: 181
Valve cover bolts: 104 in/lbs
Driveplate bolts: 54
Exhaust Manifold Nuts: 23
Exhaust heat shield bolts: 16
Intake manifold nuts/bolts: 16
Oil Pan Bolts/Nuts: 104 in/lb
Oil Pan Drain Plug: 29
Timing Belt Tensioner Bolt: 104in/lbs
Timing Belt Idler Bolt: 33
Timing Belt Cover Bolts: 104in/lbs
Rear Main Seal Oil Retainer Bolt: 104in/lbs
Left Side engine mount engine bracket bolt: 33
Left Side engine mount insulator through bolt: 40
Front engine mount engine bracket bolt: 28
Rear engine mount engine bracket bolts: 28
Engine mount insulator nut front and rear: 40
Passenger side engine mount bolts: 28

Other
Engine Oil with Filter
...V6: 4.6 quarts
...I4: 4.5 quarts
AutoTranny Fluid
...V6: 3.1 quarts
...I4: 2.6 quarts
ManualTranny Fluid
...I4: 2 quarts
Coolant
...v6: 5.9 quarts
...i4: 5.7 quarts(auto) 5.8 quarts(manual)
Sparkplug Gap
...0.039-0.043inch
Engine Firing Order
...i4: 1 3 4 2
...v6: 1 4 2 5 3 6
Idle Speed
...i4: 650-750
...v6: 630-730
Valve Clearnaces(cold engine)
Intake
...i4: .009-.011inch
...v6: .008-.009inch
Exhaust
...v6 & i4: .011-.013inch
Cyl Cylinder Compression Test Pressure(at WOT)
...Standard: 178psi
...Minimum: 135psi
...Max variation between cylinders: 28psi
Cyl Oil Pressure(warm engine)
...i4: At 3000rpm: 50psi
...i4: at idle: 10psi minimum
...v6: At 3000rpm: 71psi
...v6: at idle: 10psi minimum
Fuel Pressure Key on/Engine Off: 47-54 psi
Fuel Pressure at idle
...i4: vacuum hose attached: 38-46psi
...i4: vacuum hose detached: 47-54psi
...v6: vacuum hose attached: 32-40psi
...v6: vacuum hose detached: 41-48psi
Fuel Pump Max Pressure: 65psi
Battery Voltage:
...Engine off: 11.5-12
...Engine on: 13.5-15
Ignition Timing:
...i4: 12Degrees +/-2 BTDC in Park or Neutral
...v6: 10degrees +/-2 BTDC in park or neutral
 
Last edited:

001Stunna

Well-Known Member
Joined
Oct 21, 2008
Posts
3,203
Reaction score
81
Location
Toronto, ON CANADA

Russianred

Snail Spools You!
Joined
Jan 10, 2007
Posts
9,455
Reaction score
50
Location
Southern Maine [207]
This info is indeed posted elsewhere, but please do NOT delete this thread.. This is a GREAT compilation, in case someone can't find the other thread.. typing 'torque specs' in search will SURELY pull this one up for even the n00b user!!

Thanks Levin!! Repped!! :D
 
Back
Top