coupe2000
Well-Known Member
posibly 02 sensor needs removed and cleaned some large dposits of carbon that came loss from sea foam could be clogging the finns and disrupting the signal.try claning with a can of tb claner and wire brush.
posibly 02 sensor needs removed and cleaned some large dposits of carbon that came loss from sea foam could be clogging the finns and disrupting the signal.try claning with a can of tb claner and wire brush.
o2 sensors are too fragile for that harsh of a cleaning. What you can do it gently brush it off with a nylon brush and then pass the sensor through a torch flame a few times to burn away any deposits. Spraying chemicals directly on it is a big no no, carb and brake cleaner are labeled as "o2 sensor safe" only because when used correctly, they'll be combusted or evaporated before they reach the sensor itself.
Nothing like tearing down the engine on a Saturday morning and givin' it a good scrubbin' for the Sunday drive to church!
I'm really impressed with Piston Polish cleaner, it's right next to Windex at the store... can't go wrong with Crank Detailer either....