2001 Accord I4 MT
I'll be replacing the following parts, and wondering if there's anything else I should be replacing or cleaning while I'm in these areas.
Timing belt and front-of-engine seals:
VTEC solenoid gaskets:
Since I'll have the valve cover off, I'm going to do a valve adjustment. Anything else I should be replacing or otherwise servicing while I'm in these areas?
I'll be replacing the following parts, and wondering if there's anything else I should be replacing or cleaning while I'm in these areas.
Timing belt and front-of-engine seals:
- timing belt
- balance belt
- timing belt tensioner
- balance belt tensioner
- tensioner springs (2)
- water pump and gasket
- crank seal
- balance shaft seal
- balance shaft seal retainer
- cam seal
- balance gear case gasket (sits between rear balance gear case and oil pump)
- alternator/AC belt
- power steering belt
- dipstick o-ring
- valve cover gasket
- spark plug tube seals (4)
VTEC solenoid gaskets:
- both VTEC solenoid gaskets
- VTEC oil pressure switch o-ring
- clean EGR valve since I'll probably need to remove it to access VTEC solenoid bolts
- EGR valve gasket
Since I'll have the valve cover off, I'm going to do a valve adjustment. Anything else I should be replacing or otherwise servicing while I'm in these areas?