xXxcastroxXx
New Member
Re: H23a vtec swap? some help please?
Our distributor plug on the engine harness is an odd plug so this is what i did.
The obd2 jdm engine does not have the ckp and tdc sensor on the oil pump housing like the f23a1 does. The jdm dizzy has them inside. I made a harness to complete the circuit so it would run. I can make this harness in about 4 hours.
i have a 2002 accord ex f23a1 with a 5speed m/t and bought a h23a obd2 motor to swap of the 98-02 accord wagon SIR ch9 everything plugged right in but my original f23a1 harness plug for the distributor is a 4 pin and the h23a distributor is a obd2 small plug 8 pin... how can i make it work?? i also bought a 0bd1 jdm p13 and a obd2b to obd1 step down harness for the ecu anyone please help will the p13 send the pulse to the injectors automatically ????
Our distributor plug on the engine harness is an odd plug so this is what i did.
The obd2 jdm engine does not have the ckp and tdc sensor on the oil pump housing like the f23a1 does. The jdm dizzy has them inside. I made a harness to complete the circuit so it would run. I can make this harness in about 4 hours.
i have a 2002 accord ex f23a1 with a 5speed m/t and bought a h23a obd2 motor to swap of the 98-02 accord wagon SIR ch9 everything plugged right in but my original f23a1 harness plug for the distributor is a 4 pin and the h23a distributor is a obd2 small plug 8 pin... how can i make it work?? i also bought a 0bd1 jdm p13 and a obd2b to obd1 step down harness for the ecu anyone please help will the p13 send the pulse to the injectors automatically ????