White6GAV6
Well-Known Member
205/40 will be fine. Or a 205/35 if you want.
Wheel Fitment Thread
- Thread starter xci.ed6
- Start date
truWarier02
Well-Known Member
Depends on the brand and model too; some run narrower than others in the same specs. My 215/40/18 Federal SS595 are actually about 221mm; whereas a Falken Ziex912 is 216mm.
Google something like this "Federal SS595 215/40/18 section width" and results will show up listing actual section width in inches like 8.8in. Convert it to mm.
Google something like this "Federal SS595 215/40/18 section width" and results will show up listing actual section width in inches like 8.8in. Convert it to mm.
MichaelPower
Well-Known Member
ended up with 205/40/18 nankang's so we'll see how it goes. hows the fitment going btw?
my names imickel on instagramEDIT: just looked through your ride thread. hope you figure out the front camber issues its gonna look sweet
Last edited:
White6GAV6
Well-Known Member
ended up with 205/40/18 nankang's so we'll see how it goes. hows the fitment going btw?
EDIT: just looked through your ride thread. hope you figure out the front camber issues its gonna look sweet
I figured that one out haha. 205/40 shouldn't give you any troubles. And I've been waiting on some parts for the front, should be getting them early next week. So hopefully they will be able to do the job.
Jordan_H
Well-Known Member
I have a square wheel set up and I'm using natural camber. Right now I have a 25mm spacer in the rear and this is my fitment with just a roll and I don't rub ever.
So my question is what size spacer should I put up front? I was thinking 15mm but I don't want my tires sticking past my fenders and I don't want to buy a camber kit.
So my question is what size spacer should I put up front? I was thinking 15mm but I don't want my tires sticking past my fenders and I don't want to buy a camber kit.
Brad2274
Well-Known Member
17s or 18s?
Jordan_H
Well-Known Member
Up front would I be able to fit 17x9+15 tire size 205/40? This is without a camber kit and sitting at 23-24 ground to fender
truWarier02
Well-Known Member
24" f-g won't work out well.
23" is more like it, or 1/5" lower, and natural camber should be around -4.
23" is more like it, or 1/5" lower, and natural camber should be around -4.
