upper ball joint nut size

vtecrippa

Member
Joined
Aug 14, 2012
Posts
16
Reaction score
0
Location
mass
ok so i just did a new driverside axle and a new lower ball joint. but while taking the top BJ nut off the threads in the nut were messed up. the BJ is fine. does anyone know what size castle nut it is? im trying to find any random nut in the garage that fits so i can bring it down to the local hardware store and get one but im not having any luck
 

BlkCurrantKord

Super Moderator
Joined
Sep 7, 2005
Posts
9,870
Reaction score
85
Location
Ohio
Honda just calls it a 10mm nut. Should be the standard 12x1.5 thread pitch.

Any hardware store should be able to look it up for you in their system.
 

vtecrippa

Member
Joined
Aug 14, 2012
Posts
16
Reaction score
0
Location
mass
Honda just calls it a 10mm nut. Should be the standard 12x1.5 thread pitch.

Any hardware store should be able to look it up for you in their system.

thank you. i found out the tie rod nut is the same size so ill bring that nut in with me.
 

vtecrippa

Member
Joined
Aug 14, 2012
Posts
16
Reaction score
0
Location
mass
Well I went to the local hardware store and nothing. Spent a while looking and still found nothing. I'm just gonna buy an upper balljoint for 20 bucks and use the nut it comes with.

Damn Hondas lol:jerkit:
 
Back
Top