cmgreensr
Well-Known Member
I don't have that ring, at least not on the forks that my tokicos currently reside in. I'll have to check my stock forks to see if they have it.
DIY: "Boat look" Remedy for Accords on Lowering Springs
- Thread starter AFAccord
- Start date
will definately give this a shotumop-apisdn
Active Member
Old thread bump!
Just did as civic_vti_type_ suggested on my '99 LX. The rings popped off after a few blows with a bronze hammer. There are no spot welds holding the rings on, it's purely an interference fit. I still had to grind the forks about 15 minutes per side before things fit. Coated the inside of the forks with a thick axle grease to (hopefully) abate the rust.
