Red H Emblem Front

goldenchamp

Well-Known Member
Joined
Jun 16, 2014
Posts
51
Reaction score
0
Location
Portland, OR
Hi All! After much searching in red emblem land, I have found one for the trunk, but not the front end of my '01 Sedan. Does anybody know the closest fit? (Integra DC5? S2K? CTR?) I have scoured eBay and the interwebs and haven't found one that really fits. (I measured about 85mm x 75mm) Thanks!
 

FNCONE

Well-Known Member
Joined
Feb 8, 2013
Posts
364
Reaction score
14
Location
NYC
I used the dc5 front emblem. Part number 75701-s6m-z01. It fit nicely, imo. You can see my ride thread and look at my pics. Need to mod the back pins (make the holes for the bumber) or remove them.
 
Last edited:

goldenchamp

Well-Known Member
Joined
Jun 16, 2014
Posts
51
Reaction score
0
Location
Portland, OR
I used the dc5 front emblem. Part number 75701-s6m-z01. It fit nicely, imo. You can see my ride thread and look at my pics. Need to mod the back pins (make the holes for the bumber) or remove them.

Thanks! 'Repped for sure!
 

blackhawksfan18

Well-Known Member
Joined
Dec 30, 2013
Posts
182
Reaction score
1
Location
Chicago, IL
20140525_122649_zps3adcadce.jpg


20140202_154112_zps228813ea.jpg


My rear size is the exact one from the link you posted, my front one is one size smaller (2.5"x3 I think)
 

goldenchamp

Well-Known Member
Joined
Jun 16, 2014
Posts
51
Reaction score
0
Location
Portland, OR
My rear size is the exact one from the link you posted, my front one is one size smaller (2.5"x3 I think)

I went out an measured my badges, and the front badge on the sedan lines up with the DC5 size, but the rear is actually smaller than what I had on the link. (good thing I hadn't ordered it yet, I did find one a little smaller that looks to be about the same size.)

Those look good with the SSM paint on your car!
 
Back
Top