I kno this thread is old. But honda discontinued the plastic clip on master cylinder, and now use aluminum ones, with which those parts that badger listed from summit should work. Heres the TSB: http://www.driveaccord.net/forums/attachment.php?attachmentid=405
Also on a side note, I ordered an all alum clutch master for my car and it came with the pin, but my buddy ordered one from a different company and it came threaded. so be careful.
Heres what i did to remedy my problem. Used a C-clip removal tool to take out the pistol. You are going to tap new threads. Just use the appropriate drill, and find a adapter to match. Make sure the adapter is the thread you are going to tap on one side and -3an on the other side. Then since the piston is out just clean any metal inside and put it back together. also jam jb weld into the pin holes on both side for good measure and to ensure it doesnt leak
Aeroquip FBM2610 - Aeroquip AN to NPT Adapter Fittings
Fitting, 90 Degree, -3 AN Male to 1/8 in. NPT Male, Steel, Each
Part Number: AER-FBM2610
Auto Meter 2266 - Auto Meter Metric Adapters
Fitting, Metric Adapter, Oil Pressure, 1/8 in. NPT Female to 12mm x 1 Male, Each
Part Number: ATM-2266
Earl s Performance 63010172ERL - Earl's Performance Speed-Flex Brake Lines
Brake Line, Speed-Flex, Braided Stainless Steel, 72 in., -3 AN Female, -3 AN Female, Each
Part Number: EAR-63010172ERL
Russell Performance 641431 - Russell Brake Adapter Fittings
Fittings, Brake Adapter, Steel, -3 AN to 10mm x 1.0 Male, Pair
Part Number: RUS-641431
Also on a side note, I ordered an all alum clutch master for my car and it came with the pin, but my buddy ordered one from a different company and it came threaded. so be careful.
Heres what i did to remedy my problem. Used a C-clip removal tool to take out the pistol. You are going to tap new threads. Just use the appropriate drill, and find a adapter to match. Make sure the adapter is the thread you are going to tap on one side and -3an on the other side. Then since the piston is out just clean any metal inside and put it back together. also jam jb weld into the pin holes on both side for good measure and to ensure it doesnt leak
Aeroquip FBM2610 - Aeroquip AN to NPT Adapter Fittings
Fitting, 90 Degree, -3 AN Male to 1/8 in. NPT Male, Steel, Each
Part Number: AER-FBM2610
Auto Meter 2266 - Auto Meter Metric Adapters
Fitting, Metric Adapter, Oil Pressure, 1/8 in. NPT Female to 12mm x 1 Male, Each
Part Number: ATM-2266
Earl s Performance 63010172ERL - Earl's Performance Speed-Flex Brake Lines
Brake Line, Speed-Flex, Braided Stainless Steel, 72 in., -3 AN Female, -3 AN Female, Each
Part Number: EAR-63010172ERL
Russell Performance 641431 - Russell Brake Adapter Fittings
Fittings, Brake Adapter, Steel, -3 AN to 10mm x 1.0 Male, Pair
Part Number: RUS-641431
Last edited: