Fitment Questions

truWarier02 · Nov 3, 2013

The 9.5 +22 in the fronts should tuck in real nice with your ride height. I'm not too sure about the 10.5's in the back but I know several coupes have pulled it off. You'll definitely need a pull on all 4 corners, along with the usual fender roll and bumper tab shave & relocate. I would also suggest 225/40 or 235/40 for 10.5, as 215 is way too much stretch IMO. And as insurance, get a rear camber kit just in case you need to run more negative camber.

White6GAV6 · Nov 3, 2013

Sounds like some varrstoens. I was going to run a 18x10.5 +22 square fitment but I've decided to go with 18x10 +20 works. 225/40 or 235/40 on the 10.5 would be good. And a camber kit would definitely be needed.

Brad2274 · Nov 3, 2013

215/40r18s on 10.5

give you an idea of fitment of said wheels with 215/40s compared to stock 16" wheel/tire

that's with 0 degrees camber
itll take some work for those to fit well when lowered(ignore shadow of suspension, it's not relevant)
and adams right about 225s or 235s, also your speedo would be almost spot on instead of %4 off with the 215s