want to paint the rims
- Thread starter leovalent
- Start date
RedRyder
Save the manuals
I would consider getting them powdercoated, but if that's not an option then there's nothing wrong with paint. If you don't have them professionally painted then make sure you do the prepwork right and all.
Yes, that is right. The preparation is very long. I read about some techniques In Google, I hope I will cope with it. Can I take the Krylon paint? https://www.mrosupply.com/paint-painting-supplies/spray-paint/1386194_k07908000_krylon/ I can not afford the powder coating now.
umop-apisdn
Active Member
I've painted steelies before. 90% of the job is prep work. Wash thoroughly with a good soap/degreaser. Wire wheel/sand off any rust. Prime bare metal surfaces. Lightly sand entire wheel to give it a tooth. Wash again. Wait until dry. Apply basecoat in multiple thin coats. Clear if wanted.
IMO
Wash them, very, very well!
Scuff ALL of them with Scotchbrite purple
Paint, skip primer, twice, 1st= light/medium coat, 2nd= full coat, 4 wheels = 1 can (usually)
Done, plan on a repaint when you need new tires
Wash them, very, very well!
Scuff ALL of them with Scotchbrite purple
Paint, skip primer, twice, 1st= light/medium coat, 2nd= full coat, 4 wheels = 1 can (usually)
Done, plan on a repaint when you need new tires
