just installed my TL rear sway!

white03sedan · Mar 14, 2007

I just installed the 17mm TL rear sway, I dont know if I did it right tho LOL..i know its installed right Im just worried the endlinks might be outta place..if that can happen..everything bolted right up and the endlinks are tight and not moving so maybe I did it right..Im about to take it for a spin and see..My upper tie comes in tomorrow so I will mount that too =)

white03sedan · Mar 14, 2007

ok, so I know I installed it correctly but the left side bushing has about 1/2 inches until the bend in the bar..and the right side bushing is sitting closer to the bend of the bar ...will this matter when Im driving? or do I need to adjust it over 1/4 an inch so its even on both sides?

FallenAngelHIM · Mar 14, 2007

17mm rear sway!?
i think you got the wrong one.
it's supposed to be either 20 or 22mm depending on which one you get
17 is the stock diameter i think.

champaned_out · Mar 14, 2007

FallenAngelHIM said:
17mm rear sway!?
i think you got the wrong one.
it's supposed to be either 20 or 22mm depending on which one you get
17 is the stock diameter i think.

7th gen accords have a 14mm Sway bar from what i hear... and the 2nd Gen TL (Non Type-S) have a 17mm sway bar
the type-s have 19mm
the 04-06 TL have a 20mm
and the comptech are 22mm
and i think the highest one is the suspension tech sway bar kit that has a 23mm bar

i just ordered the 04-06 TL bar, bushing, brackets, and screws all for $49 shipped

Totalimmortal · Mar 14, 2007

Yea, the TL-S is 19mm.

skabone · Mar 15, 2007

I hope you at least got the type-s sway, cause the normal TL rear sway is the same thickness as the 6th gen accord.

the rear sway was by far and away one of the best mods I've done.

white03sedan · Mar 15, 2007

yea, it took me about 20 mins to install the rear, but my neuspeed upper tie was a pain in the ***..but its in too, and tightened down so later on today I will let u guys know how it feels when I drive..I sold my TL wheels and buying some black racing harts now!

champaned_out · Mar 15, 2007

skabone said:
I hope you at least got the type-s sway, cause the normal TL rear sway is the same thickness as the 6th gen accord.

the rear sway was by far and away one of the best mods I've done.

i think they feel as big a difference as we do when we go from our stock sways to the Type-S sways

because 7th gen accords have 14mm sway bars... going from 14 to 17mm must have a big change in their suspension

FallenAngelHIM · Mar 15, 2007

since when did we start giving information regarding 7thgen?
aren't we 6thgenaccord.com
and not
X-GENACCORD.COM?

yes, i am hating.

champaned_out · Mar 16, 2007

FallenAngelHIM said:
since when did we start giving information regarding 7thgen?
aren't we 6thgenaccord.com
and not
X-GENACCORD.COM?

yes, i am hating.

because the OP seems to have 03 sedan judging by his username
and the 7th and 6th gen sway bars are completely different
so im guessing that going from 14 to 17mm on a 7th gen would be like us 6th gens going from 17 to 19+mm sway bars

just installed my TL rear sway!

white03sedan

Well-Known Member

white03sedan

Well-Known Member

FallenAngelHIM

Well-Known Member

champaned_out

Well-Known Member

Totalimmortal

Well-Known Member

skabone

Well-Known Member

white03sedan

Well-Known Member

champaned_out

Well-Known Member

FallenAngelHIM

Well-Known Member

champaned_out

Well-Known Member

Latest posts

Random media