Connector help

AWDJ32

Member
Joined
Sep 14, 2016
Posts
14
Reaction score
0
Location
Orlando
I'm doing a j32, auto swap into what used to be my 4cyl accord. Everything is flowing smoothly except the connectors on the firewall engine side. A lot of the wire colors don't match but the connectors from the engine harness and chassis side still connect. It is the big grey connectors.
 

FNCONE

Well-Known Member
Joined
Feb 8, 2013
Posts
364
Reaction score
14
Location
NYC
Maybe I can help you, Did your swap come with the engine harness? Iam a bit confused as to which connectors are not adding up. J32 ECU Harness thru firewall To engine...Unless you mean Right and left side engine bay harness which really doesnt connect to the engine. When I did mine there was issues with ABS TCS And Cruise Control, Inside was the cluster issues. Other than that everything seemed to plug right in. Let me know maybe I have some diagrams (v6 but sometimes show 4 cyl)
 

AWDJ32

Member
Joined
Sep 14, 2016
Posts
14
Reaction score
0
Location
Orlando
The v6 harness is on the engine but where the harness connects to chassis is my problem. The engine to ecu harness is fine
 
Back
Top