Go Back   6th Gen Accord DIY and Performance Forums > The Garage > URGENT - Help Quick!

URGENT - Help Quick! Car won't start, or having another issue and hoping for an answer right away? Post in here for the quickest response.

Register to remove these ads


Reply
 
Thread Tools Search this Thread
  #1  
Old 06-24-2017, 03:42 PM
Gradfien Gradfien is offline
Member
Points: 3,060, Level: 16 Points: 3,060, Level: 16 Points: 3,060, Level: 16
Activity: 0% Activity: 0% Activity: 0%
 
Join Date: Feb 2015
Location: NE Ohio
Posts: 33
Rep Power: 0
Gradfien is an unknown quantity at this point
pulled intake delete egr and abs module tdc code and will not run

The car will not idle if you get it above 2000 rpm it stays running fine. below 2000 it misses like crazy and if you don't open the throttle all the way it will eventually stall.

I have a f23a4 running on an obd1 ecu. it was running before I started my most recent build. I have a Top dead center code, I already replaced the crank position sensor and it did not help. I removed the intake manifold and all wiring connected to the manifold and now it is having the issue.

I also removed my egr valve and abs module. Is wiring needed for the egr delete?

update: I think it maybe just a fuel issue. not sure why it threw a tdc code.
__________________
99 accord 2.3l Turbo 244hp 245tq @ 12psi on dynapak
would advise others to swap in v6 instead of turbocharging

Last edited by Gradfien; 06-24-2017 at 06:22 PM.
Reply With Quote
  #2  
Old 06-24-2017, 07:00 PM
dawg316's Avatar
dawg316 dawg316 is offline
Senior Member
Points: 1,647, Level: 11 Points: 1,647, Level: 11 Points: 1,647, Level: 11
Activity: 19% Activity: 19% Activity: 19%
 
Join Date: Dec 2016
Location: canada
Posts: 177
Rep Power: 4
dawg316 is an unknown quantity at this point
Re: pulled intake delete egr and abs module tdc code and will not run

most likley an intake leak, you removed the full intake manifold?

running a obd1 ecu with a home made blocked egr valve no problem.

you make shure you used a gasket on the EGR blockoff plate ?
__________________

SOLD: 1994 EG sedan boosted 10 psi 185hp/170lb.tq
Currrent: 2000 Accord coupe h22a4 swaped ( new wheels coming soon)
Subscribe to my youtube: Wrenchlife 604 * Click red letters to view *
Reply With Quote
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


» Featured Ride
CHECK OUT THIS WEEK'S FEATURED RIDE!



Powered by vBadvanced CMPS v3.2.3