Camber help

guytv

Well-Known Member
Joined
Jul 28, 2013
Posts
152
Reaction score
0
Location
hill
So, I need to realign my camber but I do not know which adjustable ball joint to buy.

Do I get this one which is +/-1.5 degrees:
http://www.andysautosport.com/products/eibach__5.67125K.html

Or this one which is +1.5 to +3.0 degrees:
http://www.andysautosport.com/products/eibach__5.67320K.html

My driver side camber is good which is at -0.3 degrees, but my passenger side camber is off at -1.6 degrees. So, which one would work? :shrug: I just want my camber to be at a standard position.:)

Also, I am lower with a one inch gap in the front (fender to tire).
 

guytv

Well-Known Member
Joined
Jul 28, 2013
Posts
152
Reaction score
0
Location
hill
Is anybody able to help me?:shrug: I'm looking to buy the parts and install it before my alignment warranty runs out.
 

kn0x47

Senior Member
Joined
Mar 14, 2008
Posts
3,738
Reaction score
23
Location
Birmingham, AL
camber shouldnt vary that much from one side to another. Is your caster the same on both sides? I'd recommend the top listing
 

guytv

Well-Known Member
Joined
Jul 28, 2013
Posts
152
Reaction score
0
Location
hill
There is actually no caster reading. It's greyed out on the paper work. Is there supposed to be a caster reading? But it should be the same. I just lowered the car didn't mess with any camber kit.
 
Last edited:
Back
Top