B7va?

WeaponX20

Member
Joined
Jun 28, 2010
Posts
10
Reaction score
0
Location
New York
I'm eventually going to do a manual swap but I just don't have the means right now and my tranny is shot. I bought a J32A1 with the transmission attached and its become a nightmare finding everything for it. I'm just looking for a band-aid fix until I can finish with school.

Now will it work no problem with no issue? it will bolt right up and i wont need to do anything to it?
 

J30MAN

Well-Known Member
Joined
Jun 1, 2010
Posts
1,637
Reaction score
3
Location
Agawam, MA
read through the thread a little, i basically asked the same thing.
 

WeaponX20

Member
Joined
Jun 28, 2010
Posts
10
Reaction score
0
Location
New York
I read through and I'm still lost. Will the B7VA give me any problems? I kinda need to know because my car is torn apart in the Bronx...
 

J30MAN

Well-Known Member
Joined
Jun 1, 2010
Posts
1,637
Reaction score
3
Location
Agawam, MA
yes, there are harnesses you need and even with those there are going to be some wiring issues until someone comes up with a harness for it.
 

WeaponX20

Member
Joined
Jun 28, 2010
Posts
10
Reaction score
0
Location
New York
Oh. After looking at it again, you asked about a 5spd transmission. The b7VA was a 4 speed with the same internals as our transmissions...
Is there a Honda Tech on that can give some insight?
 

J30MAN

Well-Known Member
Joined
Jun 1, 2010
Posts
1,637
Reaction score
3
Location
Agawam, MA
it may have the same internals but not the same...if it came from a different engine chances are it'll need different harnesses and ecu.
 
Back
Top