Funny Throttle after Adjustment

Gaylude

New Member
Joined
Jul 11, 2015
Posts
3
Reaction score
0
Location
Louisiana
So I'm having this problem where my throttle will idle just a little too high after I accelerate. I adjusted my throttle today because it was starting to rumble on idle after I removed my stock resonator box. Now, it idles at 1k, but if I rev up, it slowly lands back around 2k, unless i put my foot under the gas pedal and pull it back towards me. Any known remedies to this without re-adjust my throttle?
 

xci.ed6

Well-Known Member
Joined
Sep 5, 2007
Posts
2,909
Reaction score
9
Location
Tampa Bay
Sounds like the throttle pedal is sticky, but I haven't seen this. Maybe the cable is, idk.

Disconnect it at the throttle body, check the cable & pedal. Lube what's sticky, reinstall/adjust it.
 

bairdandrew77

Well-Known Member
Joined
Mar 15, 2012
Posts
443
Reaction score
1
Location
Utah
^ what he said. Disconnect the throttle cable and inspect. Play around with the throttle body and see if it's sticking. Same with the cable itself. Maybe it's even kinked, so do a good visual check

Sent from my SGH-T399 using Tapatalk
 
Back
Top