Russianred
Snail Spools You!
Hey I searched but could not find the exact answer. I'm retitning my tails and applied a 3rd layer of clearcoat, after wetsanding each layer of both tint and clearcoat previously. To get the glossy smooth finish without the shtty clearcoat look on the final coat, what do I have to do? Apply polishing compound to it?
If so, is there a certain wait time for it to cure, or should I just wait a few hours.. the clearcoat dries really really fast. Thanks!
EDIT: Project Finished
Ok, so I decided to clearcoat it one last time, and apply TurtleWax polishing/rubbing compound to the Pactra tint. I think DarkSideAccord suggested this to me in the shoutbox. I was very satisfied with the result, as it came out nice and smooth, and even a little shiny. I proceeded to completely gloss it up with Meguiar's NXT Spray Wax. This resulted in brilliant shine and created just the look I was seeking for in the tints. Now it looks like I have factory tinted tails, with no drips and thorough even tint.
If so, is there a certain wait time for it to cure, or should I just wait a few hours.. the clearcoat dries really really fast. Thanks!
EDIT: Project Finished
Ok, so I decided to clearcoat it one last time, and apply TurtleWax polishing/rubbing compound to the Pactra tint. I think DarkSideAccord suggested this to me in the shoutbox. I was very satisfied with the result, as it came out nice and smooth, and even a little shiny. I proceeded to completely gloss it up with Meguiar's NXT Spray Wax. This resulted in brilliant shine and created just the look I was seeking for in the tints. Now it looks like I have factory tinted tails, with no drips and thorough even tint.
Last edited: