J series experts please chime in!

juicebox00

Well-Known Member
Joined
Aug 30, 2008
Posts
5,234
Reaction score
33
Location
SoCal
I'm going to make the simple, short, and sweet.

The set up:
Currently I have a J32A1 swapped into my sedan. The intake manifold if from a J35A4 w/o the spacer, TB is from a J32A2, it is still using the J30A1 4SPD Transmission, J30A1 Engine Harness, and J30A1 ECU.

2011-11-13_14-35-43_3541.jpg

J32A2 TB not pictured here
2011-11-0995091326.jpg


The issue:
The cars starts up great and purrs like a kittay. But at 2500rpm there is a huge misfire problem. When I floor it there is no issue and it runs great, but if I ease into the throttle the misfire comes up. The check Engine light will also begin to flash.

Codes:
Throws them in the following order
P0301
P0302
P0303
P0304
P0305
P0306
P0300

On Sunday, Hasan(S13@fullboost) and myself are going to be swapping the J32A1 Harness and a 1999 Acura TL ECU. Ignoring the issue with needing to reflash the ECU to be able to use my keys, is there anything else that could be causing these codes to appear as well as the misfire? Or after the swap on Sunday, should the codes disappear?

Thank you,

Matt :thumbsup:
 
Last edited:

6gen

New Member
Joined
Jul 10, 2012
Posts
3
Reaction score
0
Location
jersey
whats good juice. How is that engine I currently have a 6 speed swap with the j30a want either a types or a j32a1 i want to port and polish the heads. I already have a j32a2 manifold
 
Back
Top