torque spec?????

C

cardigit

Member
Joined
Feb 12, 2007
Posts
5
Reaction score
0
what is the torque specs for the connecting rods cap bolts? is it 168 in-lbs? this seem a little low to me. thnx guys
 
shavedaccord

shavedaccord

Well-Known Member
Joined
Apr 15, 2006
Posts
5,678
Reaction score
19
Location
Gates, OR
168 in-lbs then turn an additional 90 degrees...168 inch pounds = 14 foot pounds
 
Last edited:
C

cardigit

Member
Joined
Feb 12, 2007
Posts
5
Reaction score
0
thanks a lot guys!!!!
what about the bridge bolts? 22 then 58 pound foot? but there are 2 set of bolts inner (bigger) and outter (smaller), do i use the same specs on these 2 set of bolts?
 
shavedaccord

shavedaccord

Well-Known Member
Joined
Apr 15, 2006
Posts
5,678
Reaction score
19
Location
Gates, OR
should be 22 on the inside and 58 on the outter? Make sure you tighten then in the correct sequence also. Could also be torque to 22 first, then to 58. Call Honda and ask the service desk.
 
C

cardigit

Member
Joined
Feb 12, 2007
Posts
5
Reaction score
0
no help from honda. the service guy didnt even know there suppose to be 2 set of bolts. i need help!!!! anybody?
 
You must log in or register to reply here.

Latest posts

Random media

028
Inspire fogs
love this shot
justin sig
20141101 130829
Back
Top