No power to main relay

capsidx

Well-Known Member
Joined
Aug 21, 2016
Posts
476
Reaction score
21
Location
Florida
Hey guys, swap is coming to an end. Exhaust is done, engine is in. I just can’t get the main relay to send voltage to the pump. When I try to ground the relay the lights dim severely and for some reason the ground wire from the main relay has battery voltage. I know the relay is good because when I take the ground off it relay clicks but doesn’t do anything to the pump. I also hooked battery up to the pump and it ran so that’s good. The ecu grounds were good as well. The flr pin was sending voltage to the relay so I’m stumped.

update: Got it. Turns out the pinout I was looking at had igp2 listed as a ground and I found out its actually a 12 volt. As soon as I put that where it was supposed to go to the fuel pump came on. Now for the starter.
 
Last edited:
Back
Top