3 wire iac to 2 wire help

Mahonie783

New Member
Joined
Jan 3, 2016
Posts
2
Reaction score
0
Location
Laurel md
I have a 98 accord with a turbo setup on my f23. I already have a 2 wire iac with connector and adaptor plate. I'm using a p28 with obd 2 to obd 1 conversion harness. Now I know there's plenty of info about civics for this but not accords. So my question is other than changing the connector at the iac is there any changes to made a the pcm connector. I know the black blue iac wire (b23) is repined on civics but is it on accords? Has anyone else done this? Any help is appreciated. Thanks
 

Mahonie783

New Member
Joined
Jan 3, 2016
Posts
2
Reaction score
0
Location
Laurel md
Thank you! For some reason I googled the same thing but a lot of those didn't come up. Thanks again!
 

sg_81

Well-Known Member
Joined
Jul 2, 2015
Posts
75
Reaction score
0
Location
Long Beach, CA
Did you end up doing the conversion? if so which wires did you re-pin on the ecu harness.
 
Back
Top