OBD2 “no link” help

allan...

New Member
Joined
Aug 19, 2018
Posts
4
Reaction score
0
Location
Carol Stream
Hi all.
I hope someone can help.

I have a 2002 Accord v4 and this is something I’m stomped on.

My check engine light is on and I have a scanner to check the codes. This time it read “no link”. I did check on my other cars and it works fine.
Where do I begin to search for a solution.

Thank you

2002 Accord
212k
Original trans
Engine replace with 100k used engine


Sent from my iPhone using Tapatalk
 

RedRyder

Save the manuals
Joined
Sep 5, 2008
Posts
19,516
Reaction score
116
Location
Fawking, OH
For a quick fix you could have Autozone or similar read the codes.

Btw it's I4. ;)
 

Enne

Well-Known Member
Joined
Feb 24, 2017
Posts
241
Reaction score
17
Location
Pennsylvania
It's possible your OBD-II port is broken and you didn't have it plugged in all the way, or possibly messed up due to the engine being replaced.
 

allan...

New Member
Joined
Aug 19, 2018
Posts
4
Reaction score
0
Location
Carol Stream
Sorry for the slow reply.
I brought it to auto zone and they said there was no communication with the ecu.
There is power.
There was no issue since the engine was replaced.

Any help would be appreciated.
Thanks


Sent from my iPhone using Tapatalk
 

Enne

Well-Known Member
Joined
Feb 24, 2017
Posts
241
Reaction score
17
Location
Pennsylvania
Did the scanner work previously on the car before and after the engine was replaced? Or is this the first time you are trying to use the scanner with the new engine?
 
Back
Top