Projekt G23[Rebooted] | [Ended] Euro r H22A

T

TheEdge

Well-Known Member
Joined
Nov 25, 2012
Posts
76
Reaction score
0
Location
Irvine, CA
Re: Projekt G23

EPALQFw.jpg


Finally dropped the h22a into the chassis. I am using the innovative polyurethane mounts. Just a tip, Its easier to bolt rear mount first and then do the rest. You do need a spacer, shim or thick washer for the driver side mount.
 
RedRyder

RedRyder

Save the manuals
Joined
Sep 5, 2008
Posts
19,516
Reaction score
118
Location
Fawking, OH
Re: Projekt G23

That will be pretty stiff, but you might have the tolerance for it lol.
 
T

TheEdge

Well-Known Member
Joined
Nov 25, 2012
Posts
76
Reaction score
0
Location
Irvine, CA
Re: Projekt G23

SlbreJt.jpg


This is the problem I had it with the driverside mount. The nut runs out of thread and there is about half inch gap. I wasn't sure if anyone else encountered this issue. Inserted a spacer nut between nut and mount plate/bridge to reduce the gap.

9dTHQTt.jpg
 
T

TheEdge

Well-Known Member
Joined
Nov 25, 2012
Posts
76
Reaction score
0
Location
Irvine, CA
Re: Projekt G23

So the euro r has fuel inlet banjo fitting next to the egr. Solution.

A/ Cut and weld -6 AN fittings to both the banjo and firewall adapter and run a stainless steel braided line. Going to cost $60 at a local hose shop.
B/ Buy adapters from ebay and see if they work.
 
Brad2274

Brad2274

Well-Known Member
Joined
Jul 18, 2011
Posts
1,388
Reaction score
4
Location
Melbourne, FL
Re: Projekt G23

i remember running into a banjo inlet/outlet problem when replacing my 99 j30 engine with another 99 j30 engine, ended up having to swap over firewall outlets or fuel rail parts.
option A sounds like a better quality solution imo
 
T

TheEdge

Well-Known Member
Joined
Nov 25, 2012
Posts
76
Reaction score
0
Location
Irvine, CA
Re: Projekt G23

Welded -6 An fitting on the firewall adapter and the fuel rail banjo fitting. Cost $40 local hose shop.
Mue9cgJ.jpg

Nb8dCMu.jpg

268mxCK.jpg
 
T

TheEdge

Well-Known Member
Joined
Nov 25, 2012
Posts
76
Reaction score
0
Location
Irvine, CA
Re: Projekt G23

The fuel rail banjo fitting didn't work exactly. Bought russell fittings adapter #640923

fhzJRqw.jpg

cr1LsGr.jpg

8Tx1l1Y.jpg
 
You must log in or register to reply here.

Latest posts

Random media

Road to heaven
IMGP1177
137k.
Us
DSCN0600
Back
Top