CEL Codes

ferrero

New Member
Joined
Jun 12, 2008
Posts
2
Reaction score
0
Location
canada
Re: CEL Codes p1457 honda accord 2000 4 cyl 4d

i just replace my engine f23a 2.3 vitec with jdm f23a since then i have engine light i scanned it its p1457 did replace the gas cap but the light keep coming any idea what that could be thx
 

iHazSnail

Well-Known Member
Joined
Apr 25, 2008
Posts
3,409
Reaction score
7
Location
NY
jdm eh? you sure you didn't have the jdm motor before the swap? with VITEC technology?
 

BlkCurrantKord

Super Moderator
Joined
Sep 7, 2005
Posts
9,870
Reaction score
85
Location
Ohio
Re: CEL Codes p1457 honda accord 2000 4 cyl 4d

i just replace my engine f23a 2.3 vitec with jdm f23a since then i have engine light i scanned it its p1457 did replace the gas cap but the light keep coming any idea what that could be thx

The codes are all listed. READ
 

jaxaccord

Well-Known Member
Joined
Oct 12, 2008
Posts
66
Reaction score
0
Location
Jacksonville, Fl
great write up, Just to add,
codes are standardized b/t makes as should follow in series for adherence to SAE:
100's Air/Fuel Metering
200's Eng/Fuel Metering
300's Ignition/Misfire
400's Auxillary Emissions
500's Idle Speed/Cruise Control/VSS
600's Internal Module
700's & 800's Trans
Breakdown:
P-Powertrain
B-Body
C-Chassis
0 - generic code for all makes..ie. P0
1- manufacturer specific..ie...P1
Again, fantastic write up, i just wanted to add this bit...
 

Mr_Mrs_Beard

Member
Joined
Mar 10, 2009
Posts
8
Reaction score
0
Location
Mansfield, tx
Man I jumped the brown wire at the bottom and the black wire in the 4th pin up, then I also jumped the brown wire next to the black wire and all it does is make the cel disappear for 2 or 3 days.
 

9450erick

Well-Known Member
Joined
Oct 12, 2009
Posts
1,000
Reaction score
6
Location
los angeles
i have a f23a1 motor. it was a automatic but i swapped it out to a 5 speed M.T. the only problem is my computer has a rev limiter at 5000 rpm.

would anyone recommend going p28 ob1 or just finding an obd2B manuel computer?
 

f23a1_Jones

Well-Known Member
Joined
Jul 17, 2009
Posts
46
Reaction score
1
Location
Louisville
hey does anyone know how to fix their thermostat? this is my second time getting the P1486 code. I got it checked at Autozone, and the code reads that its a thermostat issue or low coolant i believe. The first time it was my coolant and now my CEL is on again, so this time im sure its the thermostat. any ideas? thanks
 
Back
Top