Go Back   6th Gen Accord DIY and Performance Forums > The Garage > DIY - Do It Yourself Forum

DIY - Do It Yourself Forum We have a lot of threads on how to do things yourself, from air intakes to suspension, brakes, even electronics. Please search first, if you can't find an article about what you're wanting to do just ask for help

Register to remove these ads


Reply
 
Thread Tools Search this Thread
  #11  
Old 03-06-2013, 10:04 AM
lashlee lashlee is offline
Senior Member
Points: 13,117, Level: 34 Points: 13,117, Level: 34 Points: 13,117, Level: 34
Activity: 0% Activity: 0% Activity: 0%
 
Join Date: Feb 2008
Location: Knoxville, TN
Age: 41
Posts: 811
Rep Power: 52
lashlee is more helpful than most
Re: DIY - Mini BBK - all OEM parts and fits inside a 16" wheel

99-08 TL for the rotors and brackets. I know that TSX, Odyssey, Pilot and some of the 7th or 8th gen Accord's use the same bracket. It's beefier than the 23T, 25T or 28T brakckets. Sorry, I thought I put that in there originally but I updated the original to reflect it. And you are welcome!! It stops well and looks meaty inside the wheels.
__________________
98 DEP Sedan...
Reply With Quote
  #12  
Old 06-12-2013, 05:29 AM
NOO NOO is offline
Junior Member
Points: 157, Level: 2 Points: 157, Level: 2 Points: 157, Level: 2
Activity: 0% Activity: 0% Activity: 0%
 
Join Date: May 2013
Location: San Francisco
Posts: 1
Rep Power: 0
NOO is an unknown quantity at this point
Re: DIY - Mini BBK - all OEM parts and fits inside a 16" wheel

I'm just curious, what's the difference between big break kits from regular ones? the pros and cons, and or does it just simply increase your breaking distance and better braking? I'm just wondering what advantages you get from it. curious since I'm new and want to have as much useful info to my knowledge. thanks
Reply With Quote
  #13  
Old 06-17-2013, 06:47 PM
lashlee lashlee is offline
Senior Member
Points: 13,117, Level: 34 Points: 13,117, Level: 34 Points: 13,117, Level: 34
Activity: 0% Activity: 0% Activity: 0%
 
Join Date: Feb 2008
Location: Knoxville, TN
Age: 41
Posts: 811
Rep Power: 52
lashlee is more helpful than most
Re: DIY - Mini BBK - all OEM parts and fits inside a 16" wheel

There are a couple of factors when it comes to braking. They basically break down to a few things, size of the rotor (both diameter and thickness), the size and make up of the caliper and the size and makeup of the pads themselves.

The larger the rotor the more swept area you have (or the ability to dissipate the heat generated during deceleration) since it takes longer for a given point to pass the pads with a larger diameter rotor. Thus it has more chance to cool and tends to limit the fade associated with an overheated brake setup. Most all big brake kits will start with at least a larger rotor and some sort of adapter bracket to move the caliper from the center line of the axle to compensate for the change in diameter.

The next step to consider is the size and make up of the caliper. Some units will use a single piston, dual piston, four piston, and it can go anywhere from there. There are two ways to look at the number of pistons and there importance. First is that the more pistons you are able to spread the clamping force across a larger area. One large piston make cover more area but it has to be centered around the middle of the pad. Two pistons can be smaller placed side by side to to apply more pressure across the face of the pad. Four pistons would have the same theory as two except two on the inside of the rotor and two on the outside of the rotor. Some four piston calipers will go a step further and have four individual pads. There are also two basic types of calipers. A single and dual piston will be called a sliding style where the pads are on the inside and the outer pad slides on a bracket to pull the pads to the rotor. Four piston units will be more rigid and push from inside and outside to apply pressure on the rotor.

The are many compounds that manufacturers go into pads, and there are many sites devoted to make up and types of pads for a given driving style.

As for pros and cons:

Pros: may get a slightly less stopping distance, better pedal feel, fill up open faced wheels, etc..
Cons: more unsprung weight, cost, possible issues in the future with replacements, could change the OEM balance for front to rear, etc...

I hope that this helps, and this barely scratches the surface of the entire subject.
__________________
98 DEP Sedan...

Last edited by lashlee; 06-17-2013 at 06:51 PM.
Reply With Quote
  #14  
Old 06-24-2013, 03:04 AM
zitro_pr's Avatar
zitro_pr zitro_pr is offline
Senior Member
Points: 10,179, Level: 30 Points: 10,179, Level: 30 Points: 10,179, Level: 30
Activity: 0% Activity: 0% Activity: 0%
 
Join Date: Mar 2007
Location: Puerto Rico
Age: 35
Posts: 152
Rep Power: 44
zitro_pr is an unknown quantity at this point
Send a message via Yahoo to zitro_pr
Re: DIY - Mini BBK - all OEM parts and fits inside a 16" wheel

I can do this in my i4 accord coupe because i have 5 lug nut conversion but using the oem caliber and brake pad system
__________________
Reply With Quote
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


» Featured Ride
CHECK OUT THIS WEEK'S FEATURED RIDE!



Powered by vBadvanced CMPS v3.2.3