Holset Turbo's

I copied this off a european site. Only place I could actually find some data. FYI - these are normally used on diesel engines (trucks) but some guys are starting to use the HX/HY35 turbo's on their B-series for some decent 350+hp applications.

Turbo identification, trim & A.R sizes?, motor size?, expected Hp and Tq numbers? I'm guessing here but thats what it looks like

Holset H1D 47/55 -- 1.6-2.0 320 hv 774
Holset H1D 50/55 yes 1.6-2.5 340 hv 925
Holset H1D/E 50/55 -- 1.6-3.0 350 hv 808
Holset H1D/E 52/55 -- 1.6-3.0 380 hv 816
Holset H1D/E 54/55 -- 1.6-3.0 410 hv 816
Holset H1C/E 54/57 -- 1.8-3.5 450 hv 993
Holset H1C/E 58/57 -- 1.8-3.5 500 hv 993
Holset H1C/E 54/60 -- 1.8-3.5 520 hv 993
Holset H1E 56/60 -- 2.0-4.0 550 hv 993
Holset H1E 58/60 -- 2.0-4.0 590 hv 1009
Holset H1E 60/65 -- 2.0-4.0 650 hv 1160
Holset HX40 60/65 -- 2.0-4.0 650 hv 950
Holset HX50 63/72 -- 2.0- 600+ hv 950
Holset HX50 67/77 -- 2.0- 600+ hv 950
Holset HX55 67/77 -- 2.0- 600+ hv 950
Holset HX55 72/77 -- 2.0- 600+ hv 1345

Looks like they're good for big HP numbers. Most don't even reach full spool till almost 4.5-5k rpms.

laggg....

interesting but i need a get up and go turbo not waiting then haul ***

Use a 14b and a 20g then. TT setup

lol, im using a gt30r

When I thought about turbo, I was gonna use a gt30r! But I got other plans now!

Like what mike?

Im gonna start a thread sometime today or over the weekend, but this build will be official, STAMPED and for real, No Bs'n on this! Turns out this build involves me and blksniper2000 who is on here from time to time! Me and Jarred have the same mechanic! Right now he has an H22 in his 6thgen and im workin on the G23, but he wants to turbo now and were gonna swap motors, hes gonna build my G23 for boost and when hes done hes gonna pull the H22 out of his car and give it to me and im gonna build it for NA power. I think ill use Bisi stage 2 H22 cams and Type S pistons and I already talked to Bisi about them. So right now im havin fun with giggle gas on my F23 and im perfecting my suspension! I gotta get new wheels and tires too but for now its suspension and buyin parts for the H22 which wont be much cuz hes got most of the stuff for the H22 already its just a matter of him finishing the boost motor and we have the best Honda mechanic!

oooo

prices?

There about $40 dollars an injector!