Gear selector

Ugafan1

New Member
Joined
Jul 24, 2018
Posts
1
Reaction score
0
Location
Columbus ms
Rebuilt the tranny in my sons car an reinstalled. The problem is it will go from park thru d3. I can run thru all the selectors an when I put in d4 it will drive an shift fine. It will not go past d3. I physically can't move the selector to d1 or d2. It was fine before I pulled tranny aside from second gear slipping which I found the problem after teardown. I don't think the cable is bad but before I spend 80 bucks on a new cable is there anything else it could be
 
Last edited:
Back
Top