Added P/S Now Stalling

FunnyVictor86

Well-Known Member
Joined
Dec 7, 2008
Posts
3,452
Reaction score
6
Location
California
Ok so some info for those who do not know my setup. I have a euro-r h22 swap with the oem euro-r ecu. The euro-r came with electronic power-steering, hence why I had to add it to mine. Ever since then I added the p/s whenever I max out the steering wheel my rpms drop down to about 600rpm sometimes causing the car to stall. I assume it's because the ecu does not compensate for the added p/s. I hope that makes sense. Is there any way to fix that?
 

2002CG3coupe

Well-Known Member
Joined
Feb 3, 2009
Posts
2,002
Reaction score
9
Location
Exit 13 - SSPkwy
I would assume it would require you open the ecu and adding the appropriate piece to solder to the euro......but don't quote me on that cause I'm not sure.....compare the f23 and euro r ecu pin-outs and see what chip or whatever it call is to that pin-out for both or if you can find a obd2 P13-A12 or P5M and just remove the immobilizer chip
 
Back
Top