Zero-Defect
Well-Known Member
- Joined
- Dec 20, 2007
- Posts
- 953
- Reaction score
- 1
Well if you're looking for better spread of light, go with these. They may seem expensive, but unless you plan on fabricating your own circuit board so you control where the lighting is coming from, these are the next best thing. I've got them in my cluster and they were well worth it. Now I don't know if you have a 4cyl or a v6 so I don't know how many 194's you'll need, but if you have a 4cyl, you're going to need a 74 for the temp and in terms of color temp, the closest thing to the 194's I suggested would be these. It uses the same .5 watt LED is the same used for the 194's. Also, in terms of the material you're using to print them on, you might want to check out some local sign shops and see if any of them carry backlit vinyl with adhesive. It'll prob cost a little more than printing it yourself, but the results should be nicer. Also, if you need some extra help with the design, I've got a few as well (was planning on doing this when I have more time)