Halabeaster54's CL Type S 6Spd/J35 Build

So here it is over the last month I've been collecting parts for my swap and my cars been off the road for a while. I really just need help from people who know what they're talking about or people who have done the swap. I want to keep this a straight to business thread. Ive compiled a list of parts I've bought and I think I need. Any corrections, additions or subtractions to the list would be most helpful since I don't want to be missing any parts or have a lot of extra parts. This is very intimidating since i am not a mechanic, dont worry im not installing this myself. So here's my list as of now.

Engine swap parts

Acura Parts
17160-RK2-A00--------------- Tl Sh-awd J37 Manifold $188.33 (bought)

Honda Parts
'04 Odyssey J35a4------------ the engine $450 (bought)
17116-R70-A00---------------J35 AV6 Manifold cover $66.50 (bought)

PowerRevRacing Parts
P383---------throttle body adapter $69.99 (bought)
P141----------2g cl type s throttle body gasket $22.99 (bought)
P149---------4g tl sh awd throttle body gasket $22.99(bought)

BoltDepot
9 bolts size 8mmx65mm with 1.25 pitch. (bought)

Innovative
Engine Mounts---------$270 (bought)

OBX
SS Headers------------$230 (bought)

Transmission swap parts

Acura Parts
('03 Acura CL-S 6sp Manual)
KA6MT-------------------2003 CLType S Transmission Assy $1100 (Bought)
22100-PGE-026---------------Flywheel - came with engine (do I need to get this?)
22200-PGE-006---------------Disk, Friction (does this come with my clutch?)
22300-PGE-006---------------Disk, Pressure (does this come with my clutch?)
Exedy OEM Clutch ---------------- $250
24600-PYZ-000---------------Stay, Change Wire - $55.53
31200-PGE-A11RM------------Motor Assy., Starter - $100
46600-S3M-A51---------------Pedal Assy., Brake - $71.57
46910-S3M-A01---------------Pedal, Clutch - $65.34
46930-S3M-A01---------------Cylinder, Slave - $77.19
50805-S3M-A03---------------Rubber,FR Transmission Mounting - $39.13
50806-S3M-A03---------------Rubber,RR Transmission Mounting - $55.35
50809-S3M-A00---------------BEAM, TRANSMISSION MOUNTING
90011-PGC-000---------------Bolt 12MM (Qty of 8) - $25.00
90034-PRC-000---------------Bolt, 12Point 8M (Qty of 6) - $25.00
(2002-2003 Acura RSX 3 Door Type-S)
08U92-S6M-200B--------------Knob - 6MT - gunna get off ebay
95701-10035-08 ---------------BOLT.. 2 OF THESE
95701-10085-08 ----------------BOLT.. 3 OF THESE
90371-S87-AOO----------------- NUT... 4 OF THESE

Honda Parts
('93 Honda Civic Si)
46920-SR3-A01----------------M/Cyl Assy., Clutch - $135.00

('99 Honda Accord 4cyl Manual)
24470-PX5-000--- --------------Lever, Gearshift - $69.96
46966-S84-A00-----------------Stay, Tank - $40.38
46971-S84-A02-----------------Hose, Clutch Fluid - $22.00
46972-S84-A01-----------------Tank, Resevoir - $23.00
46973-S84-A01-----------------Cap, Resevoir - $18.00
46974-S84-A01-----------------Diaphragm - $12.00
46990-S84-A01-----------------Brkt, Clutch Pedal - $37.00
54100-S84-A01-----------------Lever Assy., Change - $105.00
54310-S84-A01-----------------Wire, Change - $152.00
77297-S84-A00ZA--------------Panel - same as accord v6
83414-S84-A01ZA--------------Boot Assy. - get off eBay

Richies Custom Wiring Harness *Swap Magic* - (bought)

Some receipts and pictures for all of you non believers:











Sent from my iPad2 using Tapatalk

.

.

Yea its np haha. I found a whole shifter setup not sure if it comes with cables for $75. (Car-parts.com) I found a flywheel for $100-150 on it too. Can I use i4 pedals without modification or do I have to get cl s parts for that. I can pull the whole clutch pedal and assembly from a junkyard. And some of those prices are wrong I copied some part #s from a list on v6p and the prices came with it haha.


Sent from my iPad2 using Tapatalk

.

Ok that's a relief haha save my wallet some stress. And to clarify I can use the bracket too? Or do I have to she'll out $300 for a cl s one? I'm going to order the flywheel, clutch, shifter (comes with the box knob boot plate). I'd have to ask if they have the shifter cables. My manifold and other parts should be at my house on sat and Monday so I'll build the engine next week or over next weekend.Then I can focus on the tranny 100%. This weekend I'm going to clean up my engine and tranny and make them look like new. Do you still have the receipts from when you did the swap so I can get the part numbers off them? I don't want to nag you about ever damn bolt and nut haha.


Sent from my iPad2 using Tapatalk

The Oddy engine is an auto so yes you need a flywheel. NVA-AV6 sells used ones that are much cheaper than new.

Your clutch kit will include all you need in that regard.

Don't forget shift box/cables as stated above, and if you buy the cables new the stay should already be on it. Also you need the clutch lines Pipe A and B from the V6P list. Also check to make sure there isn't a slave cylinder already on the tranny, and you need the master cyl.

I was looking for your build thread but all of the info wasn't on there like it was the last time I looked at it? Did you edit it or am I just loosing my mind? And how's that list your making with rich coming along?


Sent from my iPad2 using Tapatalk

....can't believe I'm saying this but I'm ACTUALLY jealous of you...

....can't believe I'm saying this but I'm ACTUALLY jealous of you...

Click to expand...

Thank you.....I guess?

Sent from my EVO 3D using Tapatalk