Engine Swap

Zcaliper

New Member
Joined
Jul 11, 2017
Posts
1
Reaction score
0
Location
California
I just completed replacing a seized motor in a 2000 Accord 2.3 and the engine started right up. The only problem is it was running rich would die if we went over 2000 RPM. I found someone on your forum who had the same issue. It turns out I had the MAP and TPS wires mixed up as they have the same connectors. I switch d them and problem solved. Thank You!!!

But I have one more problem I'm sure is simple. The transmission was running fine before the engine seized but now it's slipping and shifting from park to drive is very rough. A heavy clunk. I replaced the fluid with genuine Honda fluid during the swap. Any ideas of what I might have done wrong??
 

dawg316

Well-Known Member
Joined
Dec 25, 2016
Posts
180
Reaction score
0
Location
canada
how did the fluid look like when you drained it?
no codes or check engine lights on? also whats your voltage whenrunning ?
 
Back
Top