Go Back   6th Gen Accord DIY and Performance Forums > The Showroom > Members Rides

Members Rides Show it off and get some feedback from fellow Accord owners

Register to remove these ads


Reply
 
Thread Tools Search this Thread
  #1  
Old 02-10-2018, 09:58 PM
Jeremy86's Avatar
Jeremy86 Jeremy86 is offline
Junior Member
Points: 132, Level: 1 Points: 132, Level: 1 Points: 132, Level: 1
Activity: 0% Activity: 0% Activity: 0%
 
Join Date: Feb 2018
Location: Springfield
Posts: 10
Rep Power: 0
Jeremy86 is an unknown quantity at this point
Member Photo Albums
Jeremy's Accord Coupe

Originally I spent 6 months and way too much money prepping and painting my honda I used .004 holographic green metal flake over a black base coat and over the flake was 2 gallons of clear... so, in a nutshell, black base coat then flake/carrier coat's then tons of clear, now keep in mind I did not have my body kit yet OPPS!!! when I got my body kit I wanted a seamless look on my side skirts and my rear bumber and as many of you know body kits require TONS of shaping and sanding for a nice clean look, so I had to sand into my new green paint job at that point I said screw it I dont like this flashy flake green and sanded it all off and primed it grey, it sat grey for another 6 months as I contuinued to mod like an intercooler style bottem feed cold air intake, green led guage cluster conversion, installed a new exaust and kept my cat on, installed a 3 guage pillar pod that was a nightmare, a tacometer with shiftlight, upgraded all of my intirior speakers to polk audio, installed a amazon double din touchscreen sterio with backup camera, new timing belt, new water pump, complete cheap ebay coilover suspention in front and back. my pictures are super scattered but I will upload what I already have and I will upload what it looks like washed the next time this snow and crappy weather clears up, I ended up painting it with a roller and Rustoleum satin black for now ($20) so i can keep driving it without it rusting to death. This is my daily driver I drive it to work and back every day and honestly, I love it its a fun car

Specs: 1999 accord coupe 2.3l 4 banger with the f23a engine, 5 speed Manuel (stock internals....for now muahahahah)

I know im supposed to wait 7 days to post my pics but I'm impatient so if you want to see my progress pics just copy and paste this link into your address bar ibb.co/album/mhbfbF and il update this post with pics after my 7 days


Ps. in a few pics i had my 4 lug to 5 lug adapters on with my Chrysler 300m wheels on just for fun if you were wondering in the primered shots i never drove it on the street with adapters but moved it around from the garage to my side driveway a few times like that lol.

((Updated pics from February 26th 2018))


Last edited by Jeremy86; 02-27-2018 at 12:21 AM.
Reply With Quote
  #2  
Old 02-11-2018, 01:52 PM
Rusty Accord Rusty Accord is offline
Senior Member
Points: 2,310, Level: 13 Points: 2,310, Level: 13 Points: 2,310, Level: 13
Activity: 0% Activity: 0% Activity: 0%
 
Join Date: Feb 2017
Location: USA
Posts: 434
Rep Power: 6
Rusty Accord is an unknown quantity at this point
Re: Jeremy's Accord Coupe

Originally Posted by Jeremy86 View Post
Originally I spent 6 months and way too much money prepping and painting my honda I used .004 holographic green metal flake over a black base coat and over the flake was 2 gallons of clear... so, in a nutshell, black base coat then flake/carrier coat's then tons of clear, now keep in mind I did not have my body kit yet OPPS!!! when I got my body kit I wanted a seamless look on my side skirts and my rear bumber and as many of you know body kits require TONS of shaping and sanding for a nice clean look, so I had to sand into my new green paint job at that point I said screw it I dont like this flashy flake green and sanded it all off and primed it grey, it sat grey for another 6 months as I contuinued to mod like an intercooler style bottem feed cold air intake, green led guage cluster conversion, installed a new exaust and kept my cat on, installed a 3 guage pillar pod that was a nightmare, a tacometer with shiftlight, upgraded all of my intirior speakers to polk audio, installed a amazon double din touchscreen sterio with backup camera, new timing belt, new water pump, complete cheap ebay coilover suspention in front and back. my pictures are super scattered but I will upload what I already have and I will upload what it looks like washed the next time this snow and crappy weather clears up, I ended up painting it with a roller and Rustoleum satin black for now ($20) so i can keep driving it without it rusting to death. This is my daily driver I drive it to work and back every day and honestly, I love it its a fun car

Specs: 1999 accord coupe 2.3l 4 banger with the f23a engine, 5 speed Manuel (stock internals....for now muahahahah)

I know im supposed to wait 7 days to post my pics but I'm impatient so if you want to see my progress pics just copy and paste this link into your address bar ibb.co/album/mhbfbF and il update this post with pics after my 7 days


Ps. in a few pics i had my 4 lug to 5 lug adapters on with my Chrysler 300m wheels on just for fun if you were wondering in the primered shots i never drove it on the street with adapters but moved it around from the garage to my side driveway a few times like that lol.
WOW, that green really had a ton of flake in it. Nice looking ride, and it's cool that it's a daily driver. That 3 gauge cluster looks like it was a nightmare to set up.
Reply With Quote
  #3  
Old 02-11-2018, 03:17 PM
datechboss101 datechboss101 is offline
Senior Member
Points: 3,153, Level: 16 Points: 3,153, Level: 16 Points: 3,153, Level: 16
Activity: 2% Activity: 2% Activity: 2%
 
Join Date: Oct 2016
Location: Orlando
Posts: 290
Rep Power: 8
datechboss101 is an unknown quantity at this point
Re: Jeremy's Accord Coupe

That green does shine and nice body kit. Did you wrapped or paint or plasti-dipped the car?
Also, I saw a few pictures and was wondering what the f*** happened to the top portion of the steering wheel? Is it to give the car an F1 look?
__________________
Lucky- 1999 Honda Accord LX 2.3L 4AT SSM- 116k miles
Godzilla- 2016 Nissan Rogue SL 2.5L CVT ABM- 51k miles
Lelu 2.0- 2017 Acura MDX Tech 3.5L 9AT BCP- 5k miles
Reply With Quote
  #4  
Old 02-11-2018, 05:55 PM
Sil2DrV6's Avatar
Sil2DrV6 Sil2DrV6 is offline
Senior Member
Points: 21,704, Level: 45 Points: 21,704, Level: 45 Points: 21,704, Level: 45
Activity: 0% Activity: 0% Activity: 0%
 
Join Date: Oct 2012
Location: PNW
Posts: 1,687
Rep Power: 42
Sil2DrV6 is more helpful than most
Re: Jeremy's Accord Coupe

Welcome to 6GA, make yourself at home. Saw the pictures of your Accord, and it was fun seeing the progress. Looking forward to seeing what you'll be doing next. Good luck with your next color of choice. And, please be extra careful with that steering wheel when you're .
Reply With Quote
  #5  
Old 02-11-2018, 10:38 PM
Jeremy86's Avatar
Jeremy86 Jeremy86 is offline
Junior Member
Points: 132, Level: 1 Points: 132, Level: 1 Points: 132, Level: 1
Activity: 0% Activity: 0% Activity: 0%
 
Join Date: Feb 2018
Location: Springfield
Posts: 10
Rep Power: 0
Jeremy86 is an unknown quantity at this point
Member Photo Albums
Cool Re: Jeremy's Accord Coupe

To Rusty Accord:

Thanks, man yeah the 3 gauge pillar pod was supposed to be as simple as fitting it over the original pillar cover and screwing it to the original but their template was WAY WAY off not even close I reshaped it with a heat gun but it was still way off so i had to slice and dice it then epoxy it to my original pillar cover then Bondo body fill it and sand 4-5 times then painted it... went from something that should have taken 30 min into a 3 day project -_- lol.

To datechboss101:

Thanks for the compliment the green was actualy a 3 stage paint process Step 1 was to prep car do body work and prime, step 2 spray black base coat to give the flake depth and better coverage (no sanding), step 3 mix green flake with binder / carrier clear and spray until satisfied (also no sanding) step 4 bury the flake in tons and tons of clearcoat then after a few day the wet sanding begins. i did try to carbon fiber wrap my hood but i failed lol i got about 90% don't and kept getting bind ups and wrinkles, and the steering wheel was just for fun since the actual rubber was falling off at the top i busted out the sawzaw and lopped it off but i plan on getting a nice quick release adapter and a new wheel in the next 2-3 weeks il make a youtube video of the process also if you want to see a video of when my honda was flake green look up this on youtube you cant miss it "My 1999 Honda Accord Coupe 2.3 vtech green flake paint job"

To Sil2DrV6:

Yeah honestly its a major hazard and was a really bad decision on my behalf lol, I wouldn't recommend it to anyone and I plan on getting a new adapter and wheel very very soon i miss having a whole wheel on quick turns.
Reply With Quote
  #6  
Old 02-12-2018, 12:32 PM
RedRyder's Avatar
RedRyder RedRyder is online now
Be a better driver


Points: 73,871, Level: 84 Points: 73,871, Level: 84 Points: 73,871, Level: 84
Activity: 9% Activity: 9% Activity: 9%
 
Join Date: Sep 2008
Location: Fawking, OH
Posts: 19,105
Rep Power: 141
RedRyder has their shit togetherRedRyder has their shit togetherRedRyder has their shit togetherRedRyder has their shit togetherRedRyder has their shit togetherRedRyder has their shit together
Member Photo Albums
Re: Jeremy's Accord Coupe

Can't imagine sanding and painting over that green after all the work and money it took to do it, must have been a hard decision. Or not haha. Anyway welcome and looking forward to pics.
__________________

Reply With Quote
  #7  
Old 02-12-2018, 05:14 PM
Jeremy86's Avatar
Jeremy86 Jeremy86 is offline
Junior Member
Points: 132, Level: 1 Points: 132, Level: 1 Points: 132, Level: 1
Activity: 0% Activity: 0% Activity: 0%
 
Join Date: Feb 2018
Location: Springfield
Posts: 10
Rep Power: 0
Jeremy86 is an unknown quantity at this point
Member Photo Albums
Cool Re: Jeremy's Accord Coupe

To RedRyder:

Yeah, it was a major bummer but the way the flake was applied it would have never looked right if I would have tried to respray the sanded areas after I shaved the body kit seams. I had about 6 months of weekend work and close to $800 in paint materials invested but I'm ok with it I just want it to be the way I vision it. and thanks for the welcome.
Reply With Quote
  #8  
Old 02-27-2018, 09:42 AM
Jeremy86's Avatar
Jeremy86 Jeremy86 is offline
Junior Member
Points: 132, Level: 1 Points: 132, Level: 1 Points: 132, Level: 1
Activity: 0% Activity: 0% Activity: 0%
 
Join Date: Feb 2018
Location: Springfield
Posts: 10
Rep Power: 0
Jeremy86 is an unknown quantity at this point
Member Photo Albums
Cool Jeremy's 99 Coupe Update 02/26/18













added a few new things to the coupe..., 4 lug to 5 lug wheel adapters, 5 lug 17" 02 Chrysler 300m wheels and tires, tire size is 225/55/r17. it took me a ton of coil over adjusting in the rear and i had to shave down a few spots in the front fender wells to prevent rubbing, i know some of you are scratching your heads wondering why my tires are so big lol well i don't really drive my 300m that much anymore and it had new tires and almost new oem wheels so i figured i would save money for now by putting them on my daily driver and honestly i really like the aggressive mad max wheel look. added Ebay steering wheel adapter, quick release hub and steering wheel that is way safer than my homemade death trap bat wheel that was in there, i just got my XTD stage 2 clutch and lightweight flywheel in so il be trying to tackle that next.
hope you enjoy
Reply With Quote
  #9  
Old 02-27-2018, 11:24 AM
jerrychoochoo's Avatar
jerrychoochoo jerrychoochoo is offline
New Member
Points: 1,312, Level: 9 Points: 1,312, Level: 9 Points: 1,312, Level: 9
Activity: 0% Activity: 0% Activity: 0%
 
Join Date: Sep 2017
Location: So. Cal
Posts: 0
Rep Power: 0
jerrychoochoo is an unknown quantity at this point
Re: Jeremy's Accord Coupe

Where’d you get the 4 to 5 lug adapters? I’m looking to buy a set.
Reply With Quote
  #10  
Old 02-27-2018, 12:47 PM
Jeremy86's Avatar
Jeremy86 Jeremy86 is offline
Junior Member
Points: 132, Level: 1 Points: 132, Level: 1 Points: 132, Level: 1
Activity: 0% Activity: 0% Activity: 0%
 
Join Date: Feb 2018
Location: Springfield
Posts: 10
Rep Power: 0
Jeremy86 is an unknown quantity at this point
Member Photo Albums
Cool Re: Jeremy's Accord Coupe

I purchased them about a year ago on eBay, I found them by searching 4 lug to 5 lug wheel adapters but make sure to get the right size and thickness. 4 lug 4.5 inch or 114.3mm is the size for my 99 2.3 4 cylinder but i think v6 was a 5 lug.

here's a link to determine your lug pattern and spacing.
https://www.discountedwheelwarehouse..._Reference.cfm

if you need more help just let me know and il try to help.

P.S. when installing its kind of a pain in the butt, you have to swap out 1 wheel stud on each wheel with one of the longer studs that come in the kit, its easy on the front if you grind a tiny bit of the stud head flat on one side but the rear sucked since i have drum brakes in the back swapping studs what annoying... I'm planning on doing a disc brake conversion on the back soon.

Last edited by Jeremy86; 02-27-2018 at 12:50 PM.
Reply With Quote
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


» Featured Ride
CHECK OUT THIS WEEK'S FEATURED RIDE!



Powered by vBadvanced CMPS v3.2.3