001Stunna
Well-Known Member
Well for some time now i've been having my coolant needle need a smacking here and there. What happens is that the needle won't react to the coolant temp unless you smack the gauge unit a bit. It'll then go to its proper position and display coolant temp. Sometimes though it'll just fall right back down so i have to smack it again and then it'll stay up. When travelling on sh1t roads sometimes due to bumps it'll go up and down on its own. Meanwhile the "actual" coolant temp of the engine is fine as the display on my android tablet running torque does not change at all in relation to the needles mindless actions.
Now i understand chances are something is loose in the connection to the gauge display, or maybe the needle or who knows...but i've take the gauge unit off, checked everything and it all seems tight and in order ...was wondering if anyone else had the same thing happen?
Now i understand chances are something is loose in the connection to the gauge display, or maybe the needle or who knows...but i've take the gauge unit off, checked everything and it all seems tight and in order ...was wondering if anyone else had the same thing happen?