valve cover?
- Thread starter DnA
- Start date
BadgerType
Resident ***hole
five screws take off
pry apart
install gasket on new one
install on head
reuse screws
not that hard at all.
pry apart
install gasket on new one
install on head
reuse screws
not that hard at all.
shavedaccord
Well-Known Member
v6 or 4 banger?
shavedaccord
Well-Known Member
pretty straight forward then..you can look at it and see what needs to be removed for it come of..be sure to torque it properly when you put it back on so you don't pinch the gasket..should be in Inch lbs
I thought this was sticky'd somewhere, but with a brief glance, I couldn't find it...
Valve Cover Removal
Valve Cover Removal
talontsiawd
Well-Known Member
Super easy. The only thing is make sure no debris get in and don't over torque because you can easily crack it. Obviously use a new gasket unless you just replaced, then you can get away with it usually, and check for oil leaks when you are done.
shavedaccord
Well-Known Member
Valve cover bolts are 86 in-lbs
BlkCurrantKord
Super Moderator
Hand tight w/ the ratchet. NO MORE or you'll crack the bolts.
