dustint209
Well-Known Member
-Engine / Performance
-350 bored .60 over
-Rebuilt 2.02 valve heads
-488 lift lunati cam
-Holley 4160 four barrel carb with choke horn removed for more air flow.
-Edelbrock intake manifold with .5 inch spacer
-100 amp alternator
-14" filter lid
-NHRA style ram air hood scoop (Functional)
It should put out about 300hp when I get the holley carb setup right.
-Suspension
- 2in lowering blocks in rear and heavier motor in front
- Nitto extreme drag radials 275/60/15 tires in rear and 235/55/15 khumo in front
-Interior / ICE
- Nothin special. Sony deck with 300w amp and kenwood 10"
-Cosmetic
- I used a foam paint roller and some thinned out rustoleum. Works really good. I found the plans on the net. Not finished yet but it looks good for now.
Here is a short video at idle. You can hear me operating my cable exhaust cut-outs. One of my mufflers are blown out after a really loud back fire so you might here a leak when closed.
You will also see my almost stock accord dx. Doin a little body work right now.
http://s83.photobucket.com/albums/j290/dustint209/?action=view¤t=V1905100000.flv
Last edited: