blacknight
Superman, uh mod
Last edited:
Making a V-TEC indicator light
- Thread starter blacknight
- Start date
Totalimmortal
Well-Known Member
I found this on google. http://www.hazone.com/hvlight.htm
Seems MUCH more straight forward. Still no pictures except a finished install but the wire appears to always be blue w/ a yellow stripe in all cars.
Seems MUCH more straight forward. Still no pictures except a finished install but the wire appears to always be blue w/ a yellow stripe in all cars.
Totalimmortal
Well-Known Member
Edit: it's green with a yellow stripe and it's on the middle plug of your ECU. I hooked mine up to illuminate my cruise control light, I didn't want to mount and gaudy LED lights. This way you can't really tell anything has been done.
justvtec
Well-Known Member
- Joined
- Oct 25, 2005
- Posts
- 524
- Reaction score
- 0
What RPM does ur vtec kick in?Totalimmortal said:
Totalimmortal
Well-Known Member
Its variable, it kicks between 2700-3100. I'd be fun to set it at 4000, rev out up top. If I'm beatin on it, I don't drop below 4000 anyway.
Totalimmortal
Well-Known Member
Come to think of it, I bet that plays a factor in not really feeling VTEC actuation. It kicks so low that its not as pronounced. Im going to buy a VTEC controller, probably Buddy Club, and set it at 4000 and see if VTEC is more pronounced. I'd bet a good deal it will be.
justvtec
Well-Known Member
- Joined
- Oct 25, 2005
- Posts
- 524
- Reaction score
- 0
Why would it be better if u set at 4000Totalimmortal said:
