BlkCurrantKord
Super Moderator
Built by hand, not by shops and sponsors.
- Engine/Performance
F23a1 Motor
5spd swap/conversion- DIY
- Build thread - http://www.6thgenaccord.com/forums/showthread.php?t=24586
Custom painted Valve Cover
Acura CL 2.3L Valve Cover - Powdercoated
Innovative Motor Mounts w/ 85a Bushings
DC Sports SRI - painted black
Bpi Initiatives Velocity Stack w/ K&N Filter -
Bored OEM Throttle Body -
Port matched and ported Intake Manifold - Dan Paramore Racing
Port matched/ported and milled Head - Dan Paramore Racing
ARP Headstuds -
DC Sports Twin Loop Exhaust -
MSD 10.5mm Wires -
MSD SS Coil w/ MSD cap -
Prothane Polyurethane Front Motor mount insert -
Exedy OEM Clutch/Pressure plate kit -
F1 Racing 8.5lb Flywheel -
Hondata Intake Manifold Gasket -
KMS Extended intake manifold studs -
KMS Extended SS exhaust manifold studs -
Skunk2 Adjustable Cam Gear
Bisimoto Stage 2 Cam -
Intake Lift (.426) Duration (276)
- Suspension
Full 5-lug and Rear Disc swap
DIY Install - http://www.6thgenaccord.com/forums/showthread.php?t=7337
Russel Stainless Brake Lines
AMR Coilovers -
Neuspeed 27mm Front Sway Bar -
Neuspeed Upper Strut Bar -
Front subframe painted Rustoleum Hammertone (Bronze)
Progress 24mm Rear Sway Bar
- Interior/ICE
Panasonic CQ-8100 HU
'03 Accord Coupe Black Leather rear seats
Cruise Control Delete
Delrin Shift Knob
SRS system Delete
A/C Delete
- Cosmetic
01-02 Bumper Swap
Black Housing Headlights
- Nokya 2500k Highs
- Nokya 6000k Lows
Weathertech Window Visors -
Extreme Dimensions Shaved Carbon Fiber Trunk -
Fully Debadged
OEM Lip kit
- Engine/Performance
F23a1 Motor
5spd swap/conversion- DIY
- Build thread - http://www.6thgenaccord.com/forums/showthread.php?t=24586
Custom painted Valve Cover
Acura CL 2.3L Valve Cover - Powdercoated
Innovative Motor Mounts w/ 85a Bushings
DC Sports SRI - painted black
Bpi Initiatives Velocity Stack w/ K&N Filter -
Bored OEM Throttle Body -
Port matched and ported Intake Manifold - Dan Paramore Racing
Port matched/ported and milled Head - Dan Paramore Racing
ARP Headstuds -
DC Sports Twin Loop Exhaust -
MSD 10.5mm Wires -
MSD SS Coil w/ MSD cap -
Prothane Polyurethane Front Motor mount insert -
Exedy OEM Clutch/Pressure plate kit -
F1 Racing 8.5lb Flywheel -
Hondata Intake Manifold Gasket -
KMS Extended intake manifold studs -
KMS Extended SS exhaust manifold studs -
Skunk2 Adjustable Cam Gear
Bisimoto Stage 2 Cam -
Intake Lift (.426) Duration (276)
- Suspension
Full 5-lug and Rear Disc swap
DIY Install - http://www.6thgenaccord.com/forums/showthread.php?t=7337
Russel Stainless Brake Lines
AMR Coilovers -
Neuspeed 27mm Front Sway Bar -
Neuspeed Upper Strut Bar -
Front subframe painted Rustoleum Hammertone (Bronze)
Progress 24mm Rear Sway Bar
- Interior/ICE
Panasonic CQ-8100 HU
'03 Accord Coupe Black Leather rear seats
Cruise Control Delete
Delrin Shift Knob
SRS system Delete
A/C Delete
- Cosmetic
01-02 Bumper Swap
Black Housing Headlights
- Nokya 2500k Highs
- Nokya 6000k Lows
Weathertech Window Visors -
Extreme Dimensions Shaved Carbon Fiber Trunk -
Fully Debadged
OEM Lip kit
Last edited: