6th gen accord h22 swap OBD2 fan wont turn on:(!

[IllCG301]

Its gotta be your switch ir something cause i have the same swap in my cg and my temp gadge doesnt work either but my fans cut on

 

[OldNo7_CG2]

Idk anything about that swap but the sensors you used are for the accord motor or did you use the h22?

 

[OldNo7_CG2]

The body harness on driver side firewall is a 14 pin connector i think its C103 pin 3 white/green wire you might have to tap into and run a wire to the sensor and then ground the other wire to the intake manifold since the accord doesn't run a digital cluster like the prelude.