DIY: On thermostat Change please

manmanSS

New Member
Joined
Dec 28, 2008
Posts
2
Reaction score
0
Location
chicago
Hey guys,

I think I need to replace the thermostat on our 2000 accord SE 4cy, I have done it on miata's before, but on the accord I couldnt even locate the thermostat housing. Could you please help me and guide me to a good DIY.

Thanks again guys
 

Mojeans69

Well-Known Member
Joined
Apr 23, 2006
Posts
1,244
Reaction score
1
Location
Tha Bean
Follow the top radiator hose to the bubble on the engine with the 2 scrws on each side and there it is :coffee:
 

ray01

Active Member
Joined
Dec 26, 2008
Posts
28
Reaction score
0
Location
toronto
actually you need to follow the bottom rad hose to the motor
there should be 2-3 (10mm bolts)
2 bolts holding the thermostat housing and i think the 3rd bolt is a bracket

make sure you remember where the dimple is when removing it as you will need to install it back the same way
 

manmanSS

New Member
Joined
Dec 28, 2008
Posts
2
Reaction score
0
Location
chicago
thanks guys, got 1 quick question is the thermostat and its housing vertical or facing sideways?
 

finch13

Well-Known Member
Joined
Apr 2, 2008
Posts
5,025
Reaction score
41
Location
Twin Cities, MN
The flow of coolant is horizontal... some will spill out when you yank the thermostat out.
 
Back
Top