98akkordLX
Well-Known Member
Im werkin on my dash 2 rite naw.
The primer/paint/clear im using are
-Rustoleum Automotive primer
-Rustoleum Plastic gloss black paint
-Rustoleum high gloss laquer clear.
Here's some before and afters of sanding the "leather" look grit off of the plastic...
On the other hand, this piece did not have the grit but still sanded it for proper adhesion of primer, paint & clear. Same deal with this one, before and after...
These are all the pieces im duin. After a lot of thread reading and getting tips from diff ppl, the best way so far that i found out was to sand off the leather finish, then primer, then sand then primer some more, then sand some more untill desired smooth finish, then paint and clear.
BUT I STILL RAN INTO THESE PROBLEMS, CRACKS EVERYWHERE THRUOUT THE WHOLE PIECE IN THE 2ND COAT OF PAINT I WAS PUTTING ON...
SO I THOUGHT I SHOULDNT PUT TWO LAYERS OF PAINT... AND I STARTED CLEAR COATING, AND IT STILL HAPPENED!!
Can anybody help a brotha out hea? i got soo pissed off after this, i threw the paint can at a wall az hard az i could!! LOL fuggn frustrated with this shyt guys. help me finish this project!
The primer/paint/clear im using are
-Rustoleum Automotive primer
-Rustoleum Plastic gloss black paint
-Rustoleum high gloss laquer clear.
Here's some before and afters of sanding the "leather" look grit off of the plastic...
On the other hand, this piece did not have the grit but still sanded it for proper adhesion of primer, paint & clear. Same deal with this one, before and after...
These are all the pieces im duin. After a lot of thread reading and getting tips from diff ppl, the best way so far that i found out was to sand off the leather finish, then primer, then sand then primer some more, then sand some more untill desired smooth finish, then paint and clear.
BUT I STILL RAN INTO THESE PROBLEMS, CRACKS EVERYWHERE THRUOUT THE WHOLE PIECE IN THE 2ND COAT OF PAINT I WAS PUTTING ON...
SO I THOUGHT I SHOULDNT PUT TWO LAYERS OF PAINT... AND I STARTED CLEAR COATING, AND IT STILL HAPPENED!!
Can anybody help a brotha out hea? i got soo pissed off after this, i threw the paint can at a wall az hard az i could!! LOL fuggn frustrated with this shyt guys. help me finish this project!